The LeFun C2 720P Wi-Fi earned a 3rd place rank thanks to high scores for range and battery life, and impressive results for video quality and features. This monitor earned a Best Value for Wi-Fi monitors for its budget-friendly list price that is the least expensive in the group and its higher rank. This means you can get a great, top performing monitor, at a reasonable price. The LeFun has motion detection, sound activation, 2-way talk to baby, zoom, and a remote-controlled camera with real pan and tilt capabilities. The downside to this camera is a lag time when using the pan and tilt feature, and it is a little harder to use than the other Wi-Fi options we tested, but given the low price, we suspect most parents will forgive these flaws.
With more than 24,000 Amazon reviewers giving this monitor a near five-star rating, we’re proud to include the Infant Optics DXR-8 video baby monitor on our list of best baby monitors. Parents rave about its crystal-clear picture in both light and darkness, and the interchangeable wide-angle lens for larger viewing areas (sold separately). Not only that, the DXR-8 has the ability to pan and zoom across baby’s room without parents having to enter the room and move or adjust the camera. We think these features make the Infant Optics DXR-8 the best video baby monitor.
Traditional versus Wifi Baby Monitors: Starting around 2010, parents began to switch from using baby monitors with a yoked camera and screen, to using wifi cameras that can stream over smart phones, tablets, and personal computers. At the time, there weren't very many wifi cameras aimed towards the baby gear market, so people were going with familiar wifi camera brands like Nest and Samsung. Over the next few years, companies slowly began introducing baby-themed wifi cameras onto the market. While even high-quality HD wifi cameras can be found for under $50 (like this one) nowadays, companies began to realize they could package a wifi camera as a baby monitor, change the colors and themes of the app, and charge 3-4 times the price. And they continue to use this strategy to this day! So which is better? Well, this really comes down to one thing: do you want to be able to view the nursery while you're not at home? If you answer yes to this question, then you need to use a wifi monitor as opposed to a typical baby monitor. A wifi baby monitor (or any wifi camera) will connect to your internet (some are wired, some through wifi only) and stream live (well, slightly delated) video to an app on your phone. That will work in the house or out of the house, as long as you have a fast internet connection. So you can simply BYOP (bring your own phone) and leverage 20th century technology! That seems really appealing, and we highly recommend some of the newer ones (like the Cocoon Cam, Lollipop, and Nanit), but there are some things to keep in mind when figuring out the type of monitor to buy:
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
The iBaby shares several advantages over RF monitors that are common to Wi-Fi models as a category. It can be accessed from your phone anywhere. Multiple phones can connect to it. You access it via an app and don’t need to worry about finding, charging, and keeping track of a separate dedicated monitor. Some other “advantages” are add-ons we don’t consider necessary. You can record the camera’s footage, for example, or read parenting tips within the apps, or receive notifications or alerts when the monitor detects motion or sound. You can get air-quality alerts (we did not test them for accuracy). In other ways—pan/tilt, night vision, image quality—the iBaby is similar to RF video monitors like our pick.
Aimee is a pediatric occupational therapist practicing in the neonatal intensive care unit and pediatric out-patient at Central Pennsylvania Rehab Services at the Heart of Lancaster Hospital. She has been working in pediatrics for 18 years and is also the owner/operator of Aimee’s Babies LLC, a child development company. Aimee has published 3 DVDs and 9 apps which have been featured on the Rachael Ray Show and iPhone Essentials Magazine. Also certified in newborn massage and instructing yoga to children with special needs, Aimee Ketchum lives in Lititz, PA with her husband and two daughters.
In addition to being untested for efficacy, physiologic monitors can increase both your stress and your baby’s stress with false alarms and unnecessary trips to the hospital. Dr. Christopher Bonafide, of the Children’s Hospital of Philadelphia wrote that parents are increasingly bringing healthy babies to the hospital over a false alarm, noting that changes that often set off a monitor are “just normal fluctuations.”
We began by shopping for baby monitors like anyone else would if they had dozens of hours to do it. The process started with a long list of best sellers at Amazon, Walmart, Target, BuyBuy Baby, Babies“R”Us, and Costco. We found monitors recommended in editorial reviews, such as PCMag, Reviewed.com, and Tom’s Guide. We also read a ton of discussion among parents in the Amazon reviews—what features they found especially useful, and what problems tend to occur. Thinking of all this, and comparing those concerns against the things we’ve appreciated and despised in our own years of monitor use, we developed the following selection criteria:
The Nanit couldn’t be more perfect for analytical types. The camera—when placed just so—uses computer vision to watch your baby’s every move, and then tell you what it means. You get a notice on your phone, which acts like a handheld monitor, when your child is awake, acting fussy or has fallen asleep. The Nanit also assigns a sleep score to each night based on how many hours your child was actually crashed out. Other stats include how many times you went into your child’s room and how long it took for your little one to fall asleep. Because the Nanit streams live video and audio to your phone, you can also check in on your kiddo when you’re away from home. It also has a nightlight and temperature and humidity sensors.