Aside from the thousands of Amazon reviews, Reviewed.com likes it, noting that it “has physical buttons on the parent unit that are more responsive than Samsung’s [SEW3043 BrightView HD, our former runner-up] touchscreen controls.” PCMag’s Rob Pegoraro gave the DXR-8 a “Good” rating, and in his review, cites the battery life as being one of the best features. “What is remarkable is how long the display unit’s 1,200mAh battery ran on a charge,” Pegoraro says. “Infant Optics touts 10 hours of runtime with the screen off, but even with periodic peeks I didn’t get a low-battery warning until 12 hours later.”
Interchangeable Camera Lenses: Some of the newest baby monitors have interchangeable lenses to best suit your baby's room. If you have the camera positioned close to the baby, like on the edge of the crib or on a nearby dresser, you might prefer the wide angle camera. If you have the camera positioned relatively far from the baby, like on a bookshelf on the other side of the room, you might prefer the regular narrow angle camera. Flexibility is nice, particularly if you end up rearranging the room or have to move things out of the reach of a growing menace.
Among the negative reviews, the most consistent complaint has to do with connectivity issues—either difficulty linking up initially or randomly dropping the connection while in use. These represent a slim minority among mostly positive reviews, and we did not have similar issues during our test. One consequence of losing the connection (whether it’s by a dropped link or via manually unplugging the camera) is that disconnecting causes the parent unit to emit a sharp, loud, repetitive beep. It is annoying—especially so if it happens in the middle of the night—but you should rarely hear it under normal circumstances.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
I did recently downloaded Baby Monitor by Annie from Apple store and it works great! Don't really need to buy the expensive monitoring devices as with two children, I don't have much money to waste really. Of course it's for the safety of the children, so it's not really a waste, although I can easily use this app and it does everything what the big baby monitors do and even more. I've just used my old ipad as the second device placed near my LO.
This monitor offers lots of convenient features. Don’t have the best view of your baby? Use the monitor to remotely pan, tilt or zoom the camera without having to go back into the nursery. Fussy baby? Press a button to play lullabies. Need the camera to move from your bedroom to the nursery? No problem: this freestanding monitor can be set on top of a dresser or grip onto shelves and brackets. You can also unplug it and use it in another room for up to three hours on a single charge. And there’s a room temperature display. But the most impressive feature is its 1,000-foot range—the highest of all cameras on this list. That means you can hear your little one’s every chirp even if you’re hanging out in your backyard.
×