The VTech DM221 audio monitor is the best choice in the category—it’s consistently a best seller at multiple retailers, with strong reviews (four out five stars across 5,400 reviews on Amazon, as of September 2018) and similarly high ratings at Walmart, Target, and BuyBuy Baby. We wanted to recommend a less expensive video monitor, but every product that we tried at any price notably lower than our pick had such serious problems—usually poor video quality and ongoing connection issues—that we feel a higher-end audio-only monitor offers a much better value for a limited budget.
The price of the Infant Optics, about $150 at the time of writing, is on the higher end for baby monitors. As much as we wanted to recommend a more affordable video monitor, we found their shortcomings to be major enough—terrible video quality and poor connections were common—that we couldn’t recommend one. The Infant Optics offers a better value even though it’s among the more expensive options available. Many people use these daily for years, which helps justify the investment, and the reports of reliable customer service from other owners are reassuring. If you have to spend less, go audio-only. 

Aside from the thousands of Amazon reviews, Reviewed likes it, noting that it “has physical buttons on the parent unit that are more responsive than Samsung’s SEW3043 BrightView HD, our former runner-up touchscreen controls.” PCMag’s Rob Pegoraro gave the DXR-8 a “Good” rating, and in his review cites the battery life as being one of the best features. “What is remarkable is how long the display unit’s 1,200mAh battery ran on a charge,” Pegoraro writes. “Infant Optics touts 10 hours of runtime with the screen off, but even with periodic peeks I didn’t get a low-battery warning until 12 hours later.”
Eufy, a company known for its robot vacuum cleaners, is branching into baby monitors with the new $135 Security SpaceView monitor. The monitor comes with a handheld display featuring a 5-inch LCD screen and enough battery power to let you check in on the nursery throughout the day. We're waiting to get our hands on the Security SpaceView camera, but with 330-degree tilt and 110-degree pan, it sounds like there's little that will escape the 702p camera's view. Other features include night vision, noise alerts and two-way talk. Stand by for a full review.
The interface on the monitor, aka the parent unit, is basic, simple, and intuitive, while many of its competitors have awkward controls. When panning and tilting the camera, for example, the Infant Optics responds immediately and can move in very small increments. The text on the menu displays look like something off of an old Motorola RAZR, but the commands are easy to interpret and less confusing than those of some competitors. A group of four buttons makes it easy to pull up the menu and make a change (to the volume, say) without losing sight of the image on the screen. Other nice minor touches, like a display that constantly notes the temperature in the baby’s room, appear on this model but not on all of its competitors. This is not a touchscreen, but frankly, if you’ve ever used an iPhone, you’ll find the touchscreens on most baby monitors to be sorely substandard.
To use it, just place the sock on your baby’s foot to keep track of your little one’s heart rate and oxygen levels. All night long, the sock will send that health data to an app on your phone, which means you can check on your baby without ever getting out of bed. Moms love the easy-to-use app and rave about finally being able to get a peaceful night’s sleep. If, for some reason, the sock comes undone or your baby’s heart rate and oxygen levels go outside the normal range, you’ll get an alert. You can stay asleep until you absolutely need to be awake—and those valuable minutes count!

We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.


Monitor options: We wanted easy, intuitive, responsive controls, whether they were on a touchscreen or physical buttons. We also wanted the monitor to withstand being knocked off of a nightstand or messed with by a toddler, and generally be tough enough for the rigors of life in a home with young children. We didn’t really care if we could set an alarm, use the monitor as a night-light, or play chintzy music through the camera—but seeing the temperature in the kids’ room was a detail we appreciated.
The Dropcam Echo is an example of a digital video camera system that uses your existing wireless network, allowing you to use your computer or other device as the receiver. (We haven't tested this type of monitor.) Parents go to the Dropcam website, sign in to their account, and then connect the Dropcam to their router using an Ethernet cable. (Once the connection is made, you don't need to use the cable again.) The Dropcam locates your wireless network, you enter your unit's serial number, and the unit begins streaming encrypted video that you can view on a computer, iPhone, iPad, or Android device. You mount the camera in your baby's room and plug it into an electrical outlet.
A good WiFi monitor is convenient and feature-rich — or else we may as well stick with the HelloBaby. The iBaby takes both aspect to the next level. It was the fastest WiFi model to set up at only five minutes. Once you download the app, a straightforward tutorial walks you through every feature. We liked that you can choose both sensitivity levels and notification options for noise, motion, temperature, and humidity — meaning the iBaby won’t alert you to those quiet falling-asleep sounds, or small movements unless you want it to.
The iBaby M6 Wi-Fi is a Wi-Fi camera designed with nurseries in mind, something not true of the Nest Cam. This camera is easy to use, works with your internet for connectivity anywhere and has features that are baby-centric. The iBaby tied with the Nest Cam Indoor Wi-Fi in our review, but the iBaby is a better option for parents who want a camera designed for watching a baby. The iBaby includes sensors for temperature, humidity, and air-quality (things to watch when setting up best sleep practices). It has different lullabies included, and you can add your own songs, voice, or stories with minimal effort. This option has an intuitive interface and works well on your personal device with continual use even while running other apps. You can even take pictures or video of your little one in action or peacefully dreaming. You get all of this with a list price below the Nest Cam making it a good choice for parents who want a Wi-Fi option but are less concerned with longevity.
The most reliable type of movement sensing product is the mattress pad option. This product is placed under the mattress, usually on a hard board and will only work with some types of mattresses. This unit relays messages to a nursery device that alerts parents on a parent device or with an alarm in the nursery (model dependent). The BabySense 7 is a good example of a sensor pad that works under your baby's mattress.
A word of caution about extremely cheap baby video monitors (we're talking devices that cost less than $50): they're not known for their security and can be hacked. Be sure to always change the default password of any connected device you purchase. You can also protect yourself by sticking to known vendors who post frequent firmware updates and have easy-to-reach customer support.
The air-quality feature monitors Volatile Organic Compounds (VOC) levels. These are organic chemicals like acetone or benzene. The EPA says these chemicals are found in paints, paint strippers, aerosols, cleaners, disinfectants, solvents, etc and can cause serious health issues including eye, nose, and throat irritation; headaches, loss of coordination, nausea; damage to liver, kidney, and central nervous system and even cancer. The Home will alert you to high VOC levels, which indicates it may be time to open a window or increase air circulation in your house. It does not monitor carbon monoxide.

For the parent devices of dedicated monitors, the battery life ranged anywhere between 6.75 and 12.75 hours. The Wi-Fi options are harder to gauge given that the battery life depends on the kind of device used, whether or not it is being used for other applications simultaneously, and how old the battery is in the device. In general, however, we feel it is relatively safe to say that most will work longer than the best dedicated monitor battery if the device is dedicated for use with the monitor only and is not running other applications simultaneously.


Movement products are designed to sense the movement associated with a baby breathing. These products attempt to discern when your little one has not moved within a prescribed period that could indicate that they have potentially stopped breathing. While this may seem like a no-brainer option for parents worried about Sudden Infant Death Syndrome (SIDS), they are not foolproof, have not been approved by the FDA as a medical device, and are known to have false alarms where the baby is fine but then suddenly awakened by a loud alarm. While it is an interesting kind of product, we caution parents that this type of device is not a substitute for safe sleeping practices and doesn't prevent SIDS. However, if you are willing to accept false alarms, it can provide another layer of monitoring to help some parents sleep better at night. Movement sensing products are only useful until babies start to roll over, at which point they become unreliable.
There is so much potential with the Netgear Arlo, providing some excellent features in an adorable package, with awesome versatility and compatibility with Alexa systems. We were excited to test it out, with our anticipation being a little tempered by some of the negative reviews online. Let's start with all the amazing features of this wifi baby monitor. First, it has air quality sensors including nursery temperature, air quality (VOC levels), and humidity. Second, it streams in high definition (1080p) digital video and you can access the video from anywhere in the world with an internet connection (like all of the wifi baby monitors). Third, it works with Amazon Alexa and Apple HomeKit, providing some great versatility for smart homes. Third, it automatically records and saves (in an encrypted cloud storage) the past 7 days of video footage, which is awesome for being able to go back and see what happened a couple days earlier, and there's no subscription cost for that included plan. It also comes equipped with a night light and speaker so you can play lullabies to your baby during nap time or the night. Did we mention how adorable it is with its cute bunny ears? Sorry, we can't resist. It also has a couple other amazing features worth mentioning: it has a rechargeable battery in it just in case the cord gets pulled out or you want to temporarily reposition it somewhere else in your house, two-way talk, automatic alerts sent to your smart phone for sound or motion, local streaming just in case your internet goes down, white noise sound machine option, super clear night vision, a decently wide angle camera, and an adjustable camera head (move up/down to point at the crib) and remote zoom. So that's basically everything you could ever wish for in a smart baby monitor, and maybe more than you ever thought of! So there's so much to love about this monitor, but unfortunately, the system fell short of our expectations during our hands-on review. Like some of the other wifi baby monitors, it can be very delayed in making a connection, and it can get really laggy at times (even when you're on the same network as it). But in addition to those annoyances, we found that it would often disconnect without reconnecting in the middle of the day and night, and there was no apparent solution offered by Netgear (even after updating the firmware). It got really frustrating really quickly, especially since it was really fantastic when it wasn't having any connectivity issues. Pretty disappointing, but our fingers are crossed that Netgear will fix their software soon and fix these limitations. Overall, it has a truly unmatched feature list and when it's working you will absolutely love it for all its features; but when it's not working, and unfortunately that is frequently, you'll get really frustrated with it!
If you want to be as streamlined as possible and happen to have extra Apple devices hanging around, the Bump recommends the Cloud Baby Monitor app, which turns your iPhone, iPad, Apple TV, Apple Watch, and even your laptop into a secure Wi-Fi baby monitor. Use one device in the nursery as a camera, then have high-quality live video and audio transmitted to a secondary device, or even a third or fourth. Using the “parent unit,” you can talk to your child through two-way video and audio, turn on lullabies or white noise, and adjust the night-light on the other side. The app will also alert you to any noise and motion occurring in the other room.
This is the baby monitor that everybody wants to love, with its unique and cute style, its wifi capability, and its huge list of awesome features. The iBaby M7 is the newest addition to the iBaby Care line of wifi baby monitors, released in 2018 and slowly gaining traction and popularity among discerning parents. It builds upon the popular M6S baby monitor by adding a few features, including support for both 2.4GHz and 5.0GHz wifi signals (dual band), a moonlight soother projection system, air quality sensor, and diaper and feeding time alerts. When we setup the camera and installed the app on our Andoid device (also compatible with Apple iOS), we first had some difficulty getting the camera to connect. It turns out that our camera was too far from our wireless router - the manufacturer recommends that the camera is within about 15-25 feet of the router or it will have a poor connection. As a little hint, there is a black reset button on the back of the camera, and if you hold it down for about 45 seconds you'll hear a little jingle and that will reset it. We needed to use that trick to get it working. Once we got it working, it was easy to add the iBaby camera to the app and we were off to the races. And we were impressed with all the features. You could play lullabies, music, white noise, and even bedtime stories like Mother Goose (though the Jack be Nimble option wasn't so calming for bedtime!); you can even add your own music to the options, which is a really cool capability. Up on top of the camera is a little projector that will beam the "moonlight soother" projection onto the ceiling; it can be still, rotating, or off completely. Another hint is that the "help" button on the camera unit will actually turn the projector on or off when you don't have your mobile device. Additional features include motion alerts, temperature and air quality alerts, and diaper and feeding alerts (which once we set up, were actually pretty useful rather than having them on a different app). Speaking of the app, we actually liked it quite a bit - it was intuitive, reliable, and easy to use. Multiple users can access it simultaneously from different devices (use the "Invite & View Users" option), and the same app can be used to cycle between different iBaby cameras you have set up around the house (even the older M6 model can also be added). We thought the video quality was very good, it uses high definition and its night vision was clearer than many of the other options on this list. You can have your device's screen off and the app will prompt an alert when there is noise or movement, so you don't need to keep your phone's screen on all night. The app also lets you save photos and videos to your device, and you can be confident with its security because it's streaming encrypted to the state-of-the-art Amazon AWS servers. So we said it's the baby monitor everyone wants to love, and it should be clear why - the features are truly remarkable, especially for a wifi baby monitor that is only about $170. The only major downfall of this wifi camera system is the connectivity: you need to have it very close to your home's router for it to get a good connection, and it can be finicky with connectivity at times. Once it's connected, we were really happy with it, but it did intermittently disconnect at times which was definitely frustrating. So overall, this is a feature-rich wifi baby monitor that has some great things going for it, and is worthy of this spot on our list. Once they get the connectivity issues fully resolved, this will definitely creep up higher on our list. Interested? You can check out the iBaby Care M7 Baby Monitor here. 

When it comes to video monitors, you'll want to make sure that the one you're buying offers night vision and a decent resolution. Most baby monitors with a dedicated viewer sadly have low VGA resolutions, which are much worse than the majority of smartphones you can buy these days. A few have a 720p HD resolution, which is decent. We hope more baby monitors go that route in the future.
Here’s one situation when using this monitor may be a better idea for you: If you’re already using Arlo security cameras at home (and you have a baby—congrats!), you could buy this as a baby monitor now, then relocate it for use as a general security camera along with your other Arlo products when you’re through with monitoring your kid. Or if you’re in the market for an indoor security camera and you’re wondering how this could fit in, it’s worth considering our findings here alongside what we learned in our guide to wireless indoor home security cameras.
Don’t worry if your Wi-Fi tends to be spotty because this monitor operates on a secure radio frequency. Parents applaud its long range — up to 590 feet — and sensitivity to sound no matter where they are in the house. And if you’re in a far-off room, you’ll still know the temperature in the nursery because it’s displayed on the screen at all times.
But although the Arlo can be really impressive, it can also be annoying. Leaving aside that surprisingly impressive night-light, we found in testing that we weren’t using most of those extra features beyond trying them out for novelty’s sake. The Arlo is clearly the way to go if you want to access your camera while away from home. But baby monitors are far more commonly used in our own homes, often by our beds, running all night, with the video off and the audio on, and we peek in if there’s a sign of trouble. That’s about it.

The Withings Home app is what makes this device stand out among its best competition and our former pick: the Dropcam Pro (and its successor, the Nest Cam) and its Nest Home app. Both apps have premium ($7-$10 per month) optional cloud recording functionality (think DVR). Unlike the Nest Home app, the Withings Home app gives you a taste of the past for free. It stores two-days of snapshots (think animated gifs) of events that triggered a notifications. It also gives you a 24-hour snapshot of everything from the camera whenever you want. The Nest Cam won’t give a hint of the past without paying a monthly fee.


Whether you allow others one-time or occasional access to enjoy a special moment or you establish a schedule during which a regular caregiver can view and listen through the monitor, the process of controlling access is equally easy. Now, what if your baby or toddler just did something super cute when no one else had access? No worries, you can share video clips or stills right over the web.
This year alone we have seen over 30 new baby monitors enter the market, most of which are low-quality products being mass produced in China. They are cheap and might even work well for a few weeks or months, but give them a little more time and they will start to have all sorts of issues. We've seen way too many melting chargers, malfunctioning screens, and units that are completely dead after a few months. Don't waste your money! Here's some of the factors we consider in our testing:

It should come as no surprise that we selected Nanit as the best baby monitor overall—after all, it was the winner of The Bump Best of Baby Awards this year. Nanit gives you both a clear, unobstructed view of baby thanks to the over-the-crib mount as well as sleep insight reports and nightly sleep scores via an app. You not only see how baby sleeps, but learn how to help baby sleep better.
×