During our tests, we found ourselves among the fraction of buyers having problems with the display on the DXR-8. Our first test unit worked fine out of the box, but after a couple of hours running on battery, the display became distorted and nothing would fix it. Likewise, you’ll find a few complaints on Amazon of owners experiencing dead pixels after about a year of use (here’s one and here’s another). The good news: Those folks reported that Infant Optics replaced their monitors (as they did ours) even though some were out of warranty. In fact, the company consistently receives decent feedback on customer service.
Baby's exposure could potentially be even lower if parents place the camera on a wall at least 15 feet from baby (a distance still good for night vision to work properly with most monitors). Given the sensitivity of baby's developing systems we recommend placing the monitor as far away from the baby as possible while still being able to utilize the night vision as intended and see baby's face to determine if they are awake or sleeping at a glance. For most of the products, this distance is between 10-15 feet from the baby.
Most monitors (including our pick) are designed for use at home, usually while the baby is less than a few hundred feet away, well within range of a local video stream that bypasses the Internet. But many people want to use the monitor remotely—either to see what’s happening at home while they’re at work, traveling, or out on a date. For those needs, a Wi-Fi–enabled monitor, like our also-great pick, is the way to go. A Wi-Fi–enabled model works fine at home, too, but it’s not quite as simple as one that skips the routine connection and login hassles, as well as the potential security concerns, of a Web-based video option.
Another prominent Wi-Fi–enabled monitor is the Withings Home video monitor, which we dismissed without testing. The most notable drawback to the Withings is that currently more than a third of Amazon reviewers give it two or fewer stars (out of five), citing problems similar to what you see on most other Wi-Fi video monitors: bad connectivity, a bad picture, unreliable air-quality sensors, and issues with overall quality and durability. In reply to some of the negative reviews, Nokia stated that it was looking into making improvements to this model. The rebranded version, the Nokia Home Video & Air Quality Monitor, shows a similar negative pattern in its reviews (the app also has poor reviews).
Despite ranking among Amazon’s top-selling baby monitors, the Motorola MBP36S and MBP33S, which are listed on the same page, have as many negative reviews as positive ones. Many reviewers complain about poor battery life and deficient quality and durability. BabyGearLab also gave these monitors a low rating, citing the “disappointing images and sound on a hard to use parental unit.”
If you hope to keep tabs on your little one while snoozing there are a few different options depending on what your goals are or what information you hope to have. The traditional baby monitoring device was designed to tell parents what was going on in the room as far as a baby crying or needing assistance. Since then, monitoring products have evolved into seeing the baby and even knowing if your baby is moving. Knowing which products do what can help you determine which type meets your goals and is right for your family.
You'll get great video quality and an easy-to-setup system with the Safety 1st HD WiFi Baby Monitor. But the real reason to consider this device is a helpful portable audio unit you can carry with you that lets you hear what's going on in the nursery without having to notice and respond to push notifications on your phone. There's little delay when you use the two-way audio feature, and the portable unit will even flash when the camera detects motion for a helpful visual cue to launch the companion app.
The iBaby’s video and audio quality were among the best in the WiFi group, but like all WiFi monitors, quality and how well it displays real-time action depends largely on your internet quality and speed. Our testers only experienced a delay of less than a second, more noticeable than HelloBaby’s, but nowhere close to Motorola’s three-second delay.
Like most Wi-Fi–enabled monitors, the Arlo Baby offers several capabilities you won’t get with a simpler RF video monitor like our pick. You can access the camera remotely via your smartphone (or computer), you don’t need to worry about finding and charging a dedicated monitor, the video quality is far superior, and you can even store video online if you want. The Arlo is part of a robust, reliable security camera network, with more consistent app support and customer service than its Wi-Fi monitor peers. If you already use and love Arlo products, this could be a logical addition to your home-monitoring setup. Yet when you get down to actually using the product in the usual circumstances—at night, in the background, mostly on audio, with the occasional video check-in—you’re not really thinking about all of those features. That’s because you’re too busy trying to reestablish the connection and remain logged in! At times, relying on the Arlo means accepting a level of inconvenience our relatively simple RF video pick never puts you through.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.