After testing more than half-a-dozen mounted cameras that beam live video from a nursery, the best baby monitor we've tested is Netgear's Arlo Baby. Netgear's baby monitor packs in a number of must-have features such as clear 1080p video, two-way audio and a host of sensors. Everything's easily accessible from a well-organized mobile app that puts the Arlo Baby's controls at your fingertips.
Movement products are designed to sense the movement associated with a baby breathing. These products attempt to discern when your little one has not moved within a prescribed period that could indicate that they have potentially stopped breathing. While this may seem like a no-brainer option for parents worried about Sudden Infant Death Syndrome (SIDS), they are not foolproof, have not been approved by the FDA as a medical device, and are known to have false alarms where the baby is fine but then suddenly awakened by a loud alarm. While it is an interesting kind of product, we caution parents that this type of device is not a substitute for safe sleeping practices and doesn't prevent SIDS. However, if you are willing to accept false alarms, it can provide another layer of monitoring to help some parents sleep better at night. Movement sensing products are only useful until babies start to roll over, at which point they become unreliable.
Adjustable Camera Pan/Tilt/Zoom: One of the most annoying things that can happen when you're using a baby monitor is closing the door and then turning on the video monitor only to realize that your camera isn't aimed at the baby at all, and you can't see a thing. Most of the baby monitor systems would require you to go back into your baby's room and manually adjust the camera. Some of the systems we review below have remotely adjustable camera angles, so you can pan side-to-side, tilt the camera angle upward/downward, and zoom in or out, without having to go back into your baby's room. Super convenient, and a critical feature to stay at the top of our best baby monitor list. It's also nice to have a relatively wide-view camera, like the Summer Infant wide baby monitor, so that even if you don't have wireless camera panning and tilting, the odds of still seeing your baby are pretty high if you have a wide-angle camera.
The new voluntary ASTM International F2951 standard has been developed to address incidents associated with strangulations that can result from infant entanglement in the cords of baby monitors. This standard for baby monitors includes requirements for audio, video, and motion sensor monitors. It provides requirements for labeling, instructional material and packaging and is intended to minimize injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of baby monitors.
You'll get great video quality and an easy-to-setup system with the Safety 1st HD WiFi Baby Monitor. But the real reason to consider this device is a helpful portable audio unit you can carry with you that lets you hear what's going on in the nursery without having to notice and respond to push notifications on your phone. There's little delay when you use the two-way audio feature, and the portable unit will even flash when the camera detects motion for a helpful visual cue to launch the companion app.
Ease of setup and installation factored heavily into our ratings, including whether an account needed to be created and if there were any extra subscription fees necessary. Each unit had cords protruding out of its back, so design wasn't much of a factor in my choice, though parents should take care to keep dangling cords and wires away from their children's reach when setting up a monitor.
We began by shopping for baby monitors like anyone else would if they had dozens of hours to do it. The process started with a long list of best sellers at Amazon, Walmart, Target, BuyBuy Baby, and Costco. We found monitors recommended in editorial reviews, such as from PCMag, Reviewed, and Tom’s Guide. We also read a ton of discussion among parents in the Amazon reviews—what features they found especially useful, and what problems tend to occur. Thinking of all of this, and comparing those concerns against the things we’ve appreciated and despised in our own years of monitor use, we developed the following selection criteria:
How far away baby's monitor can be from the parent unit is what determines a product's range. While many manufacturers offer a "line of sight" range to describe a monitor's range, it is not a good indication of how well it will work in your home with walls and interference. It doesn't matter how much you like a specific model or brand, if it doesn't work in your house, it simply isn't going to work. We tested both indoor range and open field tests to provide the best information, but remember that the values inside your home matter more than those in an open field, unless of course, you are leaving a baby alone in an open field (which we don't recommend).
Gone are the days of silently peeking into the nursery to check on your napping baby and then, whoops, accidentally waking them up (“No, no, please no!”). A baby monitor uses a camera to watch over the crib, while you carry a handheld device that lets you know what’s going on with your child at any given moment, no matter where you are in your home. There are also other monitors that track sleep or breathing either with a clip or sock.
The Nanit baby monitor has some of the same features as an Arlo, plus an app that offers more analysis of your baby’s sleep and development, in addition to the basic video feed. However, it costs more than the Arlo, lacks the robust support and security of the Arlo app, and shares the same issues with connectivity that plague all of the other Wi-Fi–enabled monitors we’ve seen.
The Wi-Fi monitors all have lower EMF readings than the dedicated options with the lowest average EMF readings being 0.87 for the LeFun C2 720P Wi-Fi and 0.92 for the Nest Cam Indoor Wi-Fi with the reader 6 ft from the camera. The lowest average value for the dedicated monitors at 6 ft is 1.89 for the Infant Optics DXR-8 and 1.91 for the Philips Avent SCD630.
Historically speaking, baby monitors and wireless video systems have been notorious for indiscriminately sharing radio frequencies with other gadgets, meaning neighbors might have been able to eavesdrop on the things going on inside your house. Modern-day video monitors are smart enough to find the best frequencies to avoid interference and encrypt the signal from camera to monitor for standalone units or camera to router to online for smartphone-based monitors. Almost every model supports the option to add a second camera if you’d like to monitor another room, too.
After considering 43 of the most highly rated baby monitors and testing nine of them for more than 140 hours—on top of more than six years of regular monitor use as parents—we’re confident that the Infant Optics DXR-8 is the best baby monitor available. Compared with competitors, it has a more intuitive interface that’s easier to use, better battery life on its parent unit (aka the monitor), and a general simplicity and reliability that make it the easiest to use overall.
You can get the same system, with a traditional monitor screen that’s slightly smaller at 4.3 inches, for cheaper. If you’re interested in having two zoom cameras or an app that lets you see your baby while away, Project Nursery offers those configurations as well. You can also record video and take photos with it as well (requires an SD card sold separately).
The iBaby M6S Wi-Fi earned a 9 of 10 for features in our tests. This monitor offers features that increase convenience for parents and things that are fun for baby. For parent convenience, this camera works on any iOS device, can be accessed from anywhere with internet or cell phone reception (with a data plan), will work with multiple cameras, and has sound activation. The user interface is intuitive for experienced iOS users, and the zoom/pan/tilt features work well. This monitor features a true remote-controlled camera with the widest field of view range in the group, motion detection, sound activation, and it has built-in remote-controlled lullabies that include the ability to add your music of choice or your recorded voice. The iBaby M6S also monitors the temperature, humidity, and air quality of baby's room so parents can ensure baby is comfy and cozy. If all that wasn't enough, the app will remain running when using other apps, and when parents turn the device's screen off. Possibly the only things lacking are an automatic screen wake and sleep, which we think isn't that big of a deal.
Start by deciding whether you want an audio-only monitor or one that lets you see as well as hear your baby. Some parents are reassured by hearing and seeing every whimper and movement. Others find such close surveillance to be nerve-racking. Having a monitor should make life easier, not create a constant source of worry. You might find that you don't really need a monitor at all, especially if your home is small.
This monitor is known for its zoom lens, included in the box, that lets you see your baby up close even if you have to position it farther away from the crib. You can use the monitor to remotely adjust the camera, and you don’t have to worry about plugging the monitor in overnight—it can sit on your nightstand for up to 10 hours in the power-saving mode (similar to sleep mode on your computer, but it still provides sound monitoring while the display is off) and up to six hours with the display screen constantly on.
Relatively new to the market, this Philips Avent baby monitor has some really great features. Philips Avent has a long history of making high-quality baby gear and home products, including their great (non-video) DECT monitor, and this one is no exception. When we unpacked this baby monitor, it took us about 20 seconds to set up. We put the screen unit in the dining room and the camera in the nursery. Plug both of them in and you're off to the races. The digital color screen looks very good, with a high resolution 720p, and pretty good night vision. If you can't see closely enough, you can remotely zoom in by about 2x; but note that if it's not lined up perfectly this won't be so helpful since you can't remotely pan or tilt the camera to get your baby into view. Some additional features include private, secure connection, and very clear sound so you can hear your baby's every little peep. One of our favorite features was the ECO mode, which saves power in the screen unit by shutting off the screen and sound. Only when it detects a sound from your baby will it turn on to notify you. This is a great feature when you're using the hand-held screen unit with battery only, unplugged from the charger. Though we'd probably never need it, you can also remotely turn on some soothing lullabies (twinkle-twinkle, rock-a-bye baby, etc). Limitations? Well, the Philips Avent doesn't let you add multiple cameras, and the video quality isn't quite on par with some of our better-ranked units. It's high resolution digital color video, but if the signal and screen quality aren't so great (in terms of contrast, brightness, signal strength, etc) then it won't look very nice. Overall, however, a highly recommended video monitor that deserves its place on this best baby monitor list, from a company with a good track record of making safe and reliable baby products.