The HelloBaby might be a standard monitor, but it excels at the basics. It scored better than some of the more expensive WiFi monitors in picture clarity, and was hands-down the easiest to use. Just open the box, plug in the two devices, and you’re ready to go. No difficult packaging to tear through, and no account setup or device pairing necessary. Our testers had it up in running in less than 3 minutes each time.
We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.
As you’d expect, the talk-back functionality and audio quality in general are great—easily better than the crude talk-back features on our video monitor picks. With the battery lasting about 19 hours on a full charge, this monitor has the strongest battery life of any in our test (not entirely a fair comparison, as this is the only one with no screen to power). Rated to a range of 1,000 feet, it exceeds the range of our pick (700 feet) both as advertised and in practice during tests.
Wi-fi baby monitors are the latest innovation in high-tech baby gear, and they’re super convenient. A baby monitor with wi-fi allows you to connect anywhere that has Internet service or Bluetooth capability, and the monitor can often be controlled remotely using a smartphone or computer. This functionality makes the wi-fi baby monitor great for travelling (unless you’re heading to a remote location). Safety tip: No matter what connection you use, be sure that it’s a secure connection in order to prevent your monitor from being hacked.
While buying an audio-only monitor in 2018 is slightly akin to buying a flip phone, the Philips Avent has pretty much all the same features as top-of-the-line camera baby monitors, sans camera. Even better, it uses DECT (Digital Enhanced Cordless Communications) technology to guarantee zero interference ⏤ so it won’t get crossed with other signals in your house and/or your neighbor’s cordless phone. The Philips has a range of more than 90-ft inside, a 10-hour battery life, and it uses a “cry mode” so you’re only alerted to real cries for attention rather than background noise. As for extra features, it includes a night light, in-room temperature monitor, and plays lullabies ⏤ if only you could just see the baby.
Range: Range is the main drawback of an RF model, as audio monitors can roam farther out, and a Wi-Fi connection can theoretically be checked anywhere. We wanted an adequate range for a typical home—to be able to maintain a signal up or down a flight of stairs, across the house, and out on a patio or driveway, but we didn’t expect much beyond that. We zeroed in on monitors rated to about 700 feet of range or greater.1
This monitor comes with a 2.4" color screen that connects to its camera over a secure, interference-free connection, providing you with video up to 900 feet away. It boasts a two-way talk system and night vision, as well as several extra features like temperature monitoring, voice-activation mode, 2x zoom and more. The manufacturer doesn’t specify how long the battery on this video baby monitor lasts, but reviewers say you can get around six hours of continuous use from it.
The iBaby M6S was a former recommendation for a Wi-Fi–enabled monitor, but it falls short compared with the Arlo. It shares a few positive aspects—access from your phone anywhere, no need to worry about keeping track of a separate dedicated monitor, and the ability to record the camera’s footage. However, as we noted in long-term tests (and confirmed in the iBaby’s negative reviews), the app is pretty poorly done, and lost connections are a persistent problem.
In addition to the standard parent and baby unit, these monitors include a device that tracks your baby’s movements, breathing, or heart rate, and offer time-sensitive alarms that alert you if your baby hasn’t moved in the last 20–30 seconds. While they aren’t proven to reduce SIDS, many new parents told us these monitors gave them added peace of mind.

Are you a Mac fan? If so, you’ll love the amazing functionality and ease of use provided by the Cloud Baby Monitor app—which turns your iPhone, iPad or computer into a monitor with just one download. At just $4, a fraction of the price of traditional baby monitors, the Cloud Baby app brings you a host of functionality at the touch of a button, including white noise, night light and lullabies—all controlled remotely. But what makes this the best baby monitor app is the high-quality and industry-standard secure audio and video monitoring capabilities.
Rather than requiring an independent video display, the Withings Home sends footage via the cloud to your iOS device (phone or tablet). Its HD video is sharp, colorful and on par with or better than any other camera in its class. And it’s loaded with useful features that feel like the future, like push notifications when your baby makes noise or moves, and the ability to monitor your baby with unlimited range through your smartphone’s data plan. And it was the only smartphone-based camera tested to have background-audio monitoring. (Most importantly, these features aren’t just features. They really work every bit as well as advertised!)
No ordinary monitor, the Cocoon Cam lets you see your baby and a graph that shows breathing patterns on your smartphone. The camera watches the rise and fall of your child’s chest and sends an instant notification if something seems off. You’ll also get alerts when your child has fallen asleep, is crying or is about to wake up. Since the Cocoon Cam live streams the video and audio over WiFi, you can watch your baby from anywhere.
This is an awesome and versatile option for anyone looking for a video baby monitor that uses your existing device (Android, iPhone, iPad) as the screen. Simply plug it in, install the app on your phone, and you're off to the races! And it has tons of great features. You can stream high definition (720p) daytime or nighttime (night vision) video and audio, or use audio monitor only. It can send sound and motion alerts right to your device. It has two-way (intercom style) talk, so you can listen to your baby and your baby can listen to you. Unique on this list, it also has time-lapse video so you can review what your little one was up to during the night - watch them roll around and hug their blankies and lovies! When we tested this unit, this time-lapse review was my favorite feature! It also has remote pan and tilt, so if it's not in the perfect position (or your baby isn't!) you can remotely move the camera to get a better view. It also has some unique access features. For example, it uses highly secure encrypted data transmission and allows more than one app user to watch simultaneously (so mom can watch from work while grandma puts baby down for a nap!). That's a lot of awesome features for this compact baby monitoring system that can double as a security camera, and it only runs about $100 online. That's cheaper than most others on this list - but remember, it does not come with a screen, so you need to use your own device. We tested it on a Samsung Galaxy S5, iPhone 5, iPad, and an LG G4 phone. It worked really well on all of them, so we were impressed. So why isn't this higher on our list? Only because it's not an all-in-one package and you need to install the app and use your own device to watch the video. Also, the software is a bit cumbersome to set up. For instance, if your wifi name has any spaces or special characters in it, it won't recognize it at all, you will need to rename your wireless network. Fortunately that's rare but did affect our testing. We saw some good connectivity performance, with it rarely dropping off our wifi. Overall, we like it, and it deserves this (albeit low) position on our best baby monitor list!

Our favorite standard video monitor, HelloBaby, masters the basic features. It’s the easiest to set up and its video and sound quality competes with monitors twice the price. Its screen is smaller than most, but its simple interface gives you immediate access to the most important functions: talk-back, zoom, and pan; while menu button opens up customizable settings for temperature, sound, lullabies, and timers.

Most dual monitors come with split- or even quad-screen viewing, and the DBPower Digital Sound Activated baby monitor does just that. This model supports up to four cameras, allowing you to monitor four rooms at once. With features like remote pan/tilt/zoom, room temperature monitoring and alert, two-way communication and manual or automatic video recording, we found the DBPower to be the best dual baby monitor.
×