That said, while video quality is an obvious necessity to any good video monitor, it isn’t the only important metric. In practice, you won’t find yourself watching your monitor all the time. More often, you’ll either be listening in bed, or keeping the monitor in the corner of your eye while reading, watching TV, or cleaning. You want to keep tabs on your baby without obsessing about every move and sound.
* Guest Accounts: need to allow guest accounts for grandparents, but absolutely need the ability to turn OFF the microphone for those accounts. The camera is only in the baby's room, but the microphone extends as far as sound travels, and you probably don't want your mother-in-law listening to every discussion in your home. This is a HUGE security feature that is a requirement for anything with guest accounts
The longest battery life for the dedicated products in our review is the Levana Lila, which ran for 12.75 hours in full use mode. The manufacturer claims this unit will work up to 72 hours in power saving mode, but we only tested the monitors in full use. The Infant Optics DXR-8 came in second place with a shorter run time of closer to 11.5 hours. The Motorola MBP36S earned the lowest score for battery life with a runtime just under 7 hours. While not necessarily a deal breaker, there are plenty of other reasons to dislike the Motorola MBP36S, and the battery life is just a small part of a disappointing overall picture (no pun intended).
If you’re looking to take your baby monitor to the next level, choose a WiFi monitor. Our top pick is the iBaby M6T. You can watch your baby from literally anywhere through its Apple or Android app. There are lots of customization options too, like receiving push notifications when your baby wakes up or instructions on how to improve the room’s air quality.
Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of CNET.com, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro, Tested.com, Geek.com, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert... See Full Bio
The range of a product can make or break whether or not you can use certain options in your home. Depending on the distance from your room to the baby's nursery and the construction of your home or interfering appliances, you could be limited in your options of what will work for you. If your house is large or has more than a handful of walls between the two room, you'll be stuck with a Wi-Fi option only (assuming you have Internet). If your home is smaller or has fewer walls, then you'll have more options. Many of the wearable movement choices work in the baby's room and are not dependant on communicating with a parent device. However, if your room is out of earshot, then you'll never hear the alarm go off making the unit virtually useless without a sound monitoring addition. Choose your product carefully if you think the range will be an issue and purchase from retailers like Amazon that have a generous return policy. Also, don't let it sit in the box, try it out right away and send it back immediately if it doesn't work in your space. Do not rely on the manufacturer's range claim, as we have found these claims to be wildly inaccurate for many brands during our testing.
We swapped in and out more than a dozen different video cameras in front of a Graco Pack ‘N Play, and we monitored a 3-month-old baby for weeks, filming through the mesh, spying during daytime naps, and watching in the pitch black of night. When applicable, we’d take the base units out of the test apartment, down flights of stairs, to check their range.
Like most Wi-Fi–enabled monitors, the Arlo Baby offers several capabilities you won’t get with a simpler RF video monitor like our pick. You can access the camera remotely via your smartphone (or computer), you don’t need to worry about finding and charging a dedicated monitor, the video quality is far superior, and you can even store video online if you want. The Arlo is part of a robust, reliable security camera network, with more consistent app support and customer service than its Wi-Fi monitor peers. If you already use and love Arlo products, this could be a logical addition to your home-monitoring setup. Yet when you get down to actually using the product in the usual circumstances—at night, in the background, mostly on audio, with the occasional video check-in—you’re not really thinking about all of those features. That’s because you’re too busy trying to reestablish the connection and remain logged in! At times, relying on the Arlo means accepting a level of inconvenience our relatively simple RF video pick never puts you through.
Most dual monitors come with split- or even quad-screen viewing, and the DBPower Digital Sound Activated baby monitor does just that. This model supports up to four cameras, allowing you to monitor four rooms at once. With features like remote pan/tilt/zoom, room temperature monitoring and alert, two-way communication and manual or automatic video recording, we found the DBPower to be the best dual baby monitor.
Once you've settled on a type and have considered your range, you can look at the potential choice and which features they have. The more budget-friendly choices usually lack bells and whistles but are still functional. If you want more features like nightlights, lullabies, and talk to the baby, then you may pay more and the unit could be more difficult to use. The one feature we think is important is sound activation to help keep your device quiet when your baby is quiet, thereby increasing your chances of a full night's sleep.
Interchangeable Camera Lenses: Some of the newest baby monitors have interchangeable lenses to best suit your baby's room. If you have the camera positioned close to the baby, like on the edge of the crib or on a nearby dresser, you might prefer the wide angle camera. If you have the camera positioned relatively far from the baby, like on a bookshelf on the other side of the room, you might prefer the regular narrow angle camera. Flexibility is nice, particularly if you end up rearranging the room or have to move things out of the reach of a growing menace.
We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.
We got our hands on this monitor in mid-2018 for testing. It's a wifi baby monitor, just like many other options on this list, meaning that it connects to your wireless router to stream a digital video and audio signal to your smart phone wherever you are in the world. What's unique about this Safety 1st wifi baby monitor is that it also includes a wireless speaker pod that you can place anywhere in your house so you can listen in on your baby when you don't want to turn on your smart phone. This is nice during the night when you don't want to turn on your bright screen, or when your phone battery is low and you need to recharge. And the speaker pod has a batter that lasts for about 10-12 hours, so you can easily bring it into different rooms. So that's a nice added feature. And there are some additional features worth mentioning. First, it streams video in high definition 720p, though we do point out that it's basically impossible to stream 720p in real-time to your phone unless you're on the same local network (i.e. if you're at home). But that limitation isn't unique to the Safety 1st, and any wifi monitor that appears to be streaming in real-time HD is likely buffering the video for several seconds before it gets to you (so what you're seeing is delayed). Second, we were impressed with the nice wide-angle camera (130-degrees horizontal field of view), which means that it's more accommodating if you want to position the camera closer to the crib. Third, you can set up movement and sound alerts and customize the sensitivity of the alerts on your app to make sure you're getting an alert when it's important but also avoiding too many false alarms. We liked that you can change the sensitivity of the alerts, and thought that feature worked pretty well in our testing. The auto-recorded 30-second clips were also a nice touch so you can see what was going on when the alert was triggered. Some other things we liked were that the night vision was pretty good quality, you can zoom in and out (but you can't pan or tilt) using the app, there's a two-way intercom so you can talk to your baby, and you can expand the system to multiple cameras that you can toggle between using the app (you can't view multiple cameras simultaneously, however). So how does this wifi baby monitor compare to the other top rated wifi monitors on this list? Well, there's some good and bad. Setup was pretty easy, so that's definitely good, though the owner's manual was a bit difficult to understand at times. And once we got it running, it seemed to stay up and running pretty reliably, so that's also a plus. Also, there's no necessary subscription to store the 30-second clips you record for 30 days in the cloud. So here are some things that we didn't like about this monitor: first, many times when we open the app on our phone, the live stream doesn't connect immediately - sometimes we would restart the app, and other times we'd just need to wait several seconds. That's frustrating when you just received an alert and go to see what's going on, but can't. Second, if your internet goes down you're basically screwed. Unlike the Nanit and Lollipop, it will not revert to streaming over your local area network in the event of an internet outage - so even if you're at home, you won't be able to use the app or otherwise view the video. Third, the camera has a bright little light on it, which we ended up covering with electrical tape. Finally, we found the speaker pod unusually difficult to use, and were disappointed that a charger wasn't even included with it (or maybe it was just missing from our box?). Anyway, so there are some really nice features and high potential for this to be a great baby monitor, but in the end we found several limitations that made it difficult for us to justify spending upwards of $200 on it (note that it's about $150 without the speaker pod). But we'll let you make that decision. Interested? You can check out the Safety 1st HD wifi Baby Monitor here.
Our testers preferred the Baby Delight’s parent unit — its buttons were more responsive than Angelcare and it was easier to set up. This movement monitor uses a cordless magnetic sensor instead of a pad. Because the sensor is clipped onto your baby’s onesie, right next to their chest, the alarm won’t go off if you forget to disarm it before a middle-of-the-night feeding.
Video products for monitoring baby is a growing industry, and it feels like every company is jumping on the bandwagon and throwing something into the already overflowing market of monitors. This plethora of products can make sorting through products difficult and attempts to narrow the field daunting. Luckily, we have already done the legwork by doing an initial review of the top products and choosing 9 of the most popular and well-rated options to test and compare. After months of hands-on testing, we feel confident that no matter what you might be looking for in a video product for monitoring baby, that you can find it in one of our award winners or the top-ranked products in this review.
The Philips Avent DECT SCD570/10 is a sleek looking, quality sound device that has a more extended range than much of the sound competition. It has a battery life of over 30 hours and excellent sound clarity for true-to-life sounds. The nursery unit has a nightlight, lullabies, mic sensitivity function, and a 2way talk to baby feature providing the most popular features for today's demanding parents.
The price of the Infant Optics, about $150 at the time of writing, is on the higher end for baby monitors. As much as we wanted to recommend a more affordable video monitor, we found their shortcomings to be major enough—terrible video quality and poor connections were common—that we couldn’t recommend one. The Infant Optics offers a better value even though it’s among the more expensive options available. Many people use these daily for years, which helps justify the investment, and the reports of reliable customer service from other owners are reassuring. If you have to spend less, go audio-only.
Excellent used condition. Minimal usage. Comes complete and works using the included monitor. Unable to locate the app though, in the App Store. Remote pan, scan & zoom Encrypted video for private viewing in-Home and away Expandable system Free viewing app for apple and android devices Two-way communication Secure login to view on smart phones, tablets & computers
The baby monitor market is really exploding with new high-quality options that use a wifi camera connected to an app on your smart phone. The Nanit smart baby monitor is a new addition to this market, and we're really excited about it! We got our hands on this baby monitor for testing in mid-2018. Out of the box, the system is really well designed and made with high-quality components. The camera itself looks sleek and modern, similar to the Lollipop baby monitor. Like the other wifi baby monitors on this list, the Nanit streams high definition (HD) digital video and digital audio right to an app on your phone, and the app is available for Android and Apple devices, including phones and tablets. It does this by connecting to your home's wifi and streaming video right through your existing router. In our testing, we found that if you're at home the video streaming is very fast (low latency) and high clarity. And if your internet goes down, it will still work as long as you're still connected to your home wifi. On a 4G LTE connection, the video is a bit choppy from time to time but we found that a common theme with any wifi-based camera system. Let's first talk about some of the features. First, there is an awesome digital zoom feature right from your app - you pinch the screen just like with anything else and get a clearer view of your baby. Second, it has temperature and humidity sensors so you can keep track of nursery conditions. We compared the temperature and humidity readings to our hygrometer and it was very accurate. Third, we loved the wall-mount because it gives you a really nice overhead vantage point on your baby, unlike some of the standing cameras that sit on a nearby surface - this has a much better view. Note that if you want to mount it on a nearby surface like a dresser or changing table, you can buy a separate Nanit table mount. Fourth, it includes the wall mounting hardware and the cord hiding strips to keep the wires out of baby's view and reach. Fifth, the camera quality was excellent in both day and night vision conditions. Finally, there are some other nifty features, like the ability to receive alerts for sound or motion, to have audio running in the background of your phone (which is great for nighttime), a nightlight that you can control right from the app, and encrypted communication. So that's all excellent, and when you combine it with the monthly subscription ($10/month) for Nanit Insights, it's a great package that not only monitors but also can track your baby's sleep habits (including videos). A 1-month trial is included for this service so you can check it out and see if you want to consider - we suspect that most parents will be content with just the real-time monitoring without any habit tracking. In our testing, everything worked really well, and we were consistently impressed by the streaming video and sensors. The biggest drawback for this monitor is the price - it's about $250, which is up at the top of the price range for this entire list. We'll let you figure out whether it's worth the cost for your specific needs. Update: we have now been using this Nanit baby monitor for just over 3 months, and we continue to be very happy with it, it seems to be not only high quality but also reliable (so far!). Interested? you can check out the Nanit Baby Monitor here!
The Philips Avent SCD630 earned a 4th place rank, but it is the number 1 ranked dedicated monitor we tested. It has the longest range and highest ease of use scores for the dedicated options and the best score for sound clarity out of all the monitors we tested in this review. The Philips has lullabies, a nightlight, 2-way talk to baby, automatic screen wakeup/sleep, sound activation, 2x zoom, and a temperature sensor. While it struggles to offer true to life images and has fewer features than most of the competition, it is hard to deny that this plug and play monitor is a simple solution for video baby monitoring, and it gets the job done with little fuss and only a small learning curve. However, if you want a remote-controlled camera, you should look elsewhere, as this one is manual with a smaller field of view.
While we chose the Withings Home as our top pick, we know that not everyone wants a camera that connects to their phone. One expensive alternative that we grew to love was the Motorola MBP36 ($230). Its video sharpness doesn’t compete with the Withings Home, nor can it see nearly as wide, but the 3.5-inch screen still captured subtle movements, and you can change the camera angle remotely. Oddly enough, though, our absolute favorite feature was the design of its LED audio monitor. Both clear and soothing (the LEDs aren’t blinding, they’re just gentle, subtle lights), we kept it running long after formal testing was complete. We also found its range to be above average, as we were able to sneak down two flights of stairs in an old brick building and maintain signal. Three flights down, outside our building, we found the connection to mostly freeze, but the monitor never gives up—it keeps scanning for hints of frequency to give you audio and video updates. As a company, Motorola is a long-time pro at juggling radio frequencies across their products. Here, it shows.
The time you use your device depends on your needs and what type of device you choose. Movement products have the shortest lifespan and only work up to about 6-9 months old or when your little one starts rolling and moving. Sound and video options can be used for years depending on your needs. Video products can arguably be used for the longest period because it can help you keep tabs on older children as they nap and play. Wi-Fi options have the most extended use as they can also keep an eye on a nanny or work for security purposes. The Nest Cam is designed for security use and can be used for years to come in lots of applications. If the duration is a top concern for you, then the Wi-Fi video products, like the Nest cam or LeFun, should be your go-to choice.
Lullabies: Monitors often include a selection of soothing sounds to help your baby drift off to slumberland. These can be traditional nursery rhymes of the rock-a-bye-baby variety, nature sounds, white noise, or some combination of all of them. It’s a good idea to check them out before you play them to your sleeping child to determine whether they might help or hinder their sleep.
The Infant Optics’s range within our test houses was never an issue, and, as with other monitors we tested, we had to walk outside and down the street before losing the signal. The image quality was good enough to make out facial details 6 feet away in a completely dark room (as it was on others we tested). You can easily add more cameras to the set—you can use up to four Infant Optics add-on cameras, which are separate purchases, usually for about $100. You can mount the camera on a wall easily; pan and tilt 270 and 120 degrees, respectively; and set the parent unit to scan between multiple cameras to keep an eye or ear on everybody at once—another nice feature that’s not unique to this model.
So we recommend choosing a baby monitor that uses a different frequency band from your cordless phone and other wireless products in your home. The band that your cordless phone operates on should be printed somewhere on it. Remember that interference can vary widely depending on where you live, the electronic devices you have at home, and the ones your neighbors have. If, for example, you have a 2.4 GHz wireless product, such as an older cordless phone, choose a baby monitor that doesn't operate on the 2.4 GHz frequency band. People with newer phones that use DECT will have fewer issues with interference.
After considering 43 of the most highly rated baby monitors and testing nine of them for more than 140 hours—on top of more than six years of regular monitor use as parents—we’re confident that the Infant Optics DXR-8 is the best baby monitor available. Compared with competitors, it has a more intuitive interface that’s easier to use, better battery life on its parent unit (aka the monitor), and a general simplicity and reliability that make it the easiest to use overall.