While buying an audio-only monitor in 2018 is slightly akin to buying a flip phone, the Philips Avent has pretty much all the same features as top-of-the-line camera baby monitors, sans camera. Even better, it uses DECT (Digital Enhanced Cordless Communications) technology to guarantee zero interference ⏤ so it won’t get crossed with other signals in your house and/or your neighbor’s cordless phone. The Philips has a range of more than 90-ft inside, a 10-hour battery life, and it uses a “cry mode” so you’re only alerted to real cries for attention rather than background noise. As for extra features, it includes a night light, in-room temperature monitor, and plays lullabies ⏤ if only you could just see the baby.
We got our hands on this monitor in mid-2018 for testing. It's a wifi baby monitor, just like many other options on this list, meaning that it connects to your wireless router to stream a digital video and audio signal to your smart phone wherever you are in the world. What's unique about this Safety 1st wifi baby monitor is that it also includes a wireless speaker pod that you can place anywhere in your house so you can listen in on your baby when you don't want to turn on your smart phone. This is nice during the night when you don't want to turn on your bright screen, or when your phone battery is low and you need to recharge. And the speaker pod has a batter that lasts for about 10-12 hours, so you can easily bring it into different rooms. So that's a nice added feature. And there are some additional features worth mentioning. First, it streams video in high definition 720p, though we do point out that it's basically impossible to stream 720p in real-time to your phone unless you're on the same local network (i.e. if you're at home). But that limitation isn't unique to the Safety 1st, and any wifi monitor that appears to be streaming in real-time HD is likely buffering the video for several seconds before it gets to you (so what you're seeing is delayed). Second, we were impressed with the nice wide-angle camera (130-degrees horizontal field of view), which means that it's more accommodating if you want to position the camera closer to the crib. Third, you can set up movement and sound alerts and customize the sensitivity of the alerts on your app to make sure you're getting an alert when it's important but also avoiding too many false alarms. We liked that you can change the sensitivity of the alerts, and thought that feature worked pretty well in our testing. The auto-recorded 30-second clips were also a nice touch so you can see what was going on when the alert was triggered. Some other things we liked were that the night vision was pretty good quality, you can zoom in and out (but you can't pan or tilt) using the app, there's a two-way intercom so you can talk to your baby, and you can expand the system to multiple cameras that you can toggle between using the app (you can't view multiple cameras simultaneously, however). So how does this wifi baby monitor compare to the other top rated wifi monitors on this list? Well, there's some good and bad. Setup was pretty easy, so that's definitely good, though the owner's manual was a bit difficult to understand at times. And once we got it running, it seemed to stay up and running pretty reliably, so that's also a plus. Also, there's no necessary subscription to store the 30-second clips you record for 30 days in the cloud. So here are some things that we didn't like about this monitor: first, many times when we open the app on our phone, the live stream doesn't connect immediately - sometimes we would restart the app, and other times we'd just need to wait several seconds. That's frustrating when you just received an alert and go to see what's going on, but can't. Second, if your internet goes down you're basically screwed. Unlike the Nanit and Lollipop, it will not revert to streaming over your local area network in the event of an internet outage - so even if you're at home, you won't be able to use the app or otherwise view the video. Third, the camera has a bright little light on it, which we ended up covering with electrical tape. Finally, we found the speaker pod unusually difficult to use, and were disappointed that a charger wasn't even included with it (or maybe it was just missing from our box?). Anyway, so there are some really nice features and high potential for this to be a great baby monitor, but in the end we found several limitations that made it difficult for us to justify spending upwards of $200 on it (note that it's about $150 without the speaker pod). But we'll let you make that decision. Interested? You can check out the Safety 1st HD wifi Baby Monitor here.
The baby monitor market is really exploding with new high-quality options that use a wifi camera connected to an app on your smart phone. The Nanit smart baby monitor is a new addition to this market, and we're really excited about it! We got our hands on this baby monitor for testing in mid-2018. Out of the box, the system is really well designed and made with high-quality components. The camera itself looks sleek and modern, similar to the Lollipop baby monitor. Like the other wifi baby monitors on this list, the Nanit streams high definition (HD) digital video and digital audio right to an app on your phone, and the app is available for Android and Apple devices, including phones and tablets. It does this by connecting to your home's wifi and streaming video right through your existing router. In our testing, we found that if you're at home the video streaming is very fast (low latency) and high clarity. And if your internet goes down, it will still work as long as you're still connected to your home wifi. On a 4G LTE connection, the video is a bit choppy from time to time but we found that a common theme with any wifi-based camera system. Let's first talk about some of the features. First, there is an awesome digital zoom feature right from your app - you pinch the screen just like with anything else and get a clearer view of your baby. Second, it has temperature and humidity sensors so you can keep track of nursery conditions. We compared the temperature and humidity readings to our hygrometer and it was very accurate. Third, we loved the wall-mount because it gives you a really nice overhead vantage point on your baby, unlike some of the standing cameras that sit on a nearby surface - this has a much better view. Note that if you want to mount it on a nearby surface like a dresser or changing table, you can buy a separate Nanit table mount. Fourth, it includes the wall mounting hardware and the cord hiding strips to keep the wires out of baby's view and reach. Fifth, the camera quality was excellent in both day and night vision conditions. Finally, there are some other nifty features, like the ability to receive alerts for sound or motion, to have audio running in the background of your phone (which is great for nighttime), a nightlight that you can control right from the app, and encrypted communication. So that's all excellent, and when you combine it with the monthly subscription ($10/month) for Nanit Insights, it's a great package that not only monitors but also can track your baby's sleep habits (including videos). A 1-month trial is included for this service so you can check it out and see if you want to consider - we suspect that most parents will be content with just the real-time monitoring without any habit tracking. In our testing, everything worked really well, and we were consistently impressed by the streaming video and sensors. The biggest drawback for this monitor is the price - it's about $250, which is up at the top of the price range for this entire list. We'll let you figure out whether it's worth the cost for your specific needs. Update: we have now been using this Nanit baby monitor for just over 3 months, and we continue to be very happy with it, it seems to be not only high quality but also reliable (so far!). Interested? you can check out the Nanit Baby Monitor here!