Wireless devices and dirty electricity are almost impossible to get away from in our current technological age, but it doesn't mean we can't take steps to limit the exposure to ourselves and our children. Even though the current evidence is somewhat conflicting, and shows we need more studies and research because the potential is there for harm, parents should make informed and thoughtful decisions regarding their children's exposure to potential health risks, especially given that their bodies are developing and more susceptible to this type of radiation. We can't say for certain that monitors pose a health risk, but we also can't say for certain that they don't. Given this information, we feel it is important to test and report on the EMF levels of each monitor so parents can decide for themselves which product fits in best with their goals and concerns.
The longest battery life for the dedicated products in our review is the Levana Lila, which ran for 12.75 hours in full use mode. The manufacturer claims this unit will work up to 72 hours in power saving mode, but we only tested the monitors in full use. The Infant Optics DXR-8 came in second place with a shorter run time of closer to 11.5 hours. The Motorola MBP36S earned the lowest score for battery life with a runtime just under 7 hours. While not necessarily a deal breaker, there are plenty of other reasons to dislike the Motorola MBP36S, and the battery life is just a small part of a disappointing overall picture (no pun intended).
Parents love the ability to swap out the three available lenses. If you’re trying to keep track of an active toddler, use the wide-angle lenses to view the whole room. Try the normal or zoom lens when the camera is pointed at the crib to keep an eye on your sleeping baby. You can also change the camera’s viewing angle remotely from the parent unit.
Beyond that, we wanted to hear from an expert on the products’ (perceived and real) security risks. So we spoke to Mark Stanislav, the director of application security for Duo Security and the author of Hacking IoT: A Case Study on Baby Monitor Exposures and Vulnerabilities, whose research has been featured in The Wall Street Journal, The Associated Press, CNET, Good Morning America, and Forbes.
Testing battery life for all the monitors was for the parent device only. While some of the dedicated options have a battery in the camera in the event of a power outage, most do not, and they are not intended for use as an all-night option. So while we would support a cordless camera for monitoring baby, due to safety concerns with babies and strangulation hazards, none of the products in our review offer this.
The Nest Cam lets you view live video in 1080-pixel high definition, and it has many of the same features as a standard video baby monitor. For instance, it can alert you in the event of movement, and there’s a two-way talk function built in. Nest Cams also have impressive night vision, allowing you to check in on your little ones as they sleep. Because this camera uses WiFi to send you video, there’s no range limit on it — as long as both the phone and camera are connected to the internet, you’ll be able to see what’s going on.
If your internet goes down, your baby monitor goes down. A wifi baby monitor uses your home's internet connection to communicate to servers, then to your app. So if your internet connection goes down, then you will no longer be able to stream video of your baby. That's a huge consideration to keep in mind because you never know when your internet will slow down or simply stop working for several minutes or hours, and you will be stuck without a working baby monitor. There are a few wifi baby monitors that will still communicate locally (within your home's network) when the internet goes down, such as the Lollipop or Nanit. They do this by switching from internet to local area network when an outage is detected, so you can have confidence that if you're connected to your home wifi you'll still see your baby.
This is a nice new addition to our best baby monitor list, with some nice advanced features that make it quite a bit more than just a baby video monitor. Unlike the Infant Optics, this wifi baby monitor uses your own smart phone rather than an external screen. This is just like the popular wireless security cameras you can setup around the house and watch on your smartphone. So instead of walking around the house with a baby monitor screen, like from your bedroom to living room and kitchen, you can simply fire up the app and see what's going on instantly, no matter where you are. In the bathroom? No problem. Out on a date night and want to check in on what the baby sitter's up to? No problem. Just open the app on your phone (Apple or Android) and it will connect to the camera in just a couple seconds and show you a live streaming video feed (with audio) of your sleeping baby. In our testing, we thought the video quality was very good in both daylight and night vision conditions. It was the 720p high definition that helped with clarity, though the wifi video feed did become a bit choppy at points when testing on a network other than our home wifi. That's not surprising, and is just like any other live streaming video. One cool thing about the app is that we could minimize it and still have the audio playing, so you can hear everything from your baby's room while doing something completely different; in that regard, it operates a bit like a music player (iTunes, Spotify, etc). Installation of the system was pretty easy, though a bit more involved than others because of its unique features. First, you install the app on your phone and register with Cocoon Cam. Plug in your camera and use the app to scan the QR code on the back of the camera. That will get the camera and your app working together. Then, you need to mount the camera on the wall of the nursery, about 5 feet above the baby. Don't try to put it on a dresser or edge of the crib. Mount it on the wall so that it's pointing down at your sleeping baby and can see all 4 corners of the crib; we found that installing it correctly was the most important aspect for getting it to work reliably. If you don't have wifi, the camera can also be plugged into your router with an ethernet cable (they provide a short one). OK, so now that it's up and running, and assuming you've installed it per instructions, you'll be able to take advantage of its awesome features. First, the system has an awesome breathing/activity monitor that will let you watch your baby's breathing patterns. It uses infrared light to track the rise and fall of your baby's chest to monitor breathing and activity. Second, for peace of mind, it can send you little alerts when things change, like breathing has slowed or sped up. Correct baby camera placement is critical for these features, so make sure to follow instructions. The way it works is that your video feed is streamed live to the Cocoon Cam cloud where machine learning algorithms securely process the video and assess breathing, and then that information is streamed continuously to the app on your phone. It worked surprisingly well given the complexity of the data streaming and analytics. We did get some anomalous readings in our testing, but mostly when the baby camera wasn't correctly installed above the crib, so it wasn't in clear view of the baby. It also didn't work well when our baby was sleeping on her side, or when her lovies were strewn across her back in random ways. It did work impressively well as a breathing monitor, even with a swaddled baby. Third, the system allows you to download and review videos and activity data, which is a nice touch. Finally, the newest version of this baby monitor includes cry detection, which works reasonably, but we had some false alarms with other noises. So this video baby monitor provides some advanced functionality for parents interested in monitoring their baby's breathing activity and having the flexibility of using their phone as a screen. If you're just looking for a video monitor that uses a phone app, but without the breathing monitor capability, check out some of the other wireless wifi options such as the Nest Cam or Lollipop. We're not completely certain it has the accuracy of a mat-based breathing monitor, and the reliability of the breathing status indicators wasn't perfect, especially if the camera isn't perfectly installed. And no remotely controlling the camera angle (pan, tilt). So overall, this is a great baby monitor, and we're really impressed with how Cocoon Cam's newest model performs, and the feature list is really extensive. Interested? You can check out the Cocoon Cam here.