Security is a mixed bag, especially as baby monitors get more high tech. If tech giants like Apple and Google run into security flaws, high-tech baby monitors are sure to experience similar problems. However, some less high-tech baby monitors aren't secure, either, and many suffer from signal interference. We've checked each company's security policy to find the most secure options for you.
Dropped connections are another problem. "We tested our Wi-Fi monitors on two separate routers and consistently had problems -- we'd often lose the connection some time in the night and not even realize that the monitor had disconnected until morning," Wirecutter says. "This happened with all three Wi-Fi models we tested. We never really felt confident relying on any of the connected monitors overnight, despite the fact that the modem and router were literally on the other side of a wall from the monitor."
We don’t think most people would be happiest with a Wi-Fi–enabled baby monitor. The benefits—primarily, being able to view the camera footage remotely, on multiple phones, without keeping track of a separate monitor—do not make up for the disadvantages Wi-Fi monitors have as a category. Security is probably the first thing on most people’s minds. The likelihood of someone hacking into your baby monitor is remote, but it’s possible, said Mark Stanislav, director of application security at Duo Security, in an interview with The Wirecutter. You’re relying on the security of your own home network and also the ability of the manufacturer to secure all its devices. “Once you get into an Internet-connected device, and it really depends on what kind of device it is, but these devices very often bypass your home’s router and firewall. Basically, once you’re connected to this device, you are inside the home’s network. So, it’s possible to use these devices to access other devices in a home,” Stanislav said. (Stanislav was also involved in Rapid7’s research into the vulnerabilities of Wi-Fi–enabled monitors.)
This monitor may also be one of the simplest to set up. Just plug it in and start using it. That’s it! It’s great if you don’t have the time (or the tech knowledge) to connect your monitor to your wireless network or your phone. It allows you to quickly connect four cameras to check on the nursery, the play room, your toddler’s room and the living room all at once. It’s like your own kid-monitoring surveillance system. You can choose an 8-second rotation that automatically switches between rooms to let you know what’s going on.
The camera, which is the most elegant looking of the testing group, sits on a magnetic base that unfortunately cannot be mounted on the wall and must sit on a surface. The camera itself cannot be tilted or panned. It can only be adjusted manually within the concave base—meaning it can be pointed downward, at least a little bit, but its wide-angle lens lessens the needs for dramatic angle adjustments. The unit also include a “privacy mode” where the decorative cover can be rotated to block the camera and signal it to not record any audio or video.
Unfortunately, The DECT SCD570/10 is one of the most expensive sound devices we tested with a price that rivals some of the video options. This higher price means that parents looking in this price range may want to consider a video product instead to get more bang for their buck. Alternatively, if you want a sound option with full-bodied sound and fancy features for baby, and you aren't interested in watching your little one, then the SCD570 could be the one for you.
As with any internet-connected device that watches or listens to your home, it's not out of the ordinary to be somewhat wary of a smart baby monitor. All Internet of Things (IoT) devices are potential soft spots for hackers to monitor you. Anything you network can possibly be compromised, and while you shouldn't be afraid of an epidemic of camera breaches, you should always weigh the convenience of these devices against the risk of someone getting control of the feed.
The DXR-8 packs a lot of punch for the price, including a sound-activated 3.5-inch full-color LCD screen, crystal clear video quality, and an impressive 270-/120-degree pan and tilt range ⏤ controlled remotely, of course. It’s also the only baby monitor on the market to include interchangeable lens for advanced zoom and wide-angle shots, in case the only good spot to set up is across the nursery from the crib.
This is an excellent baby monitor that uses many of the same principles as the Nanit, Nest Cam, and Cocoon Cam. It uses a cute and innovative video camera on a flexible stick that can hook around the top of the crib, bend into an upright stand, or mount onto the wall with an included mount. This versatility is great for the different stages of development, and it can be flexibly used as a security camera or baby monitor. For new babies that aren't old enough to stand up and grab the camera, it can be mounted right on the crib's upper rail, giving you the perfect view onto your sleeping baby. Then for child safety, it can be moved to the wall or on top of a nearby dresser, to stay out of baby's curious hands and give you a good vantage point into the crib. The camera hooks into your existing home wifi, and you use your smart phone to connect (there's a cell phone app for the iPhone or Android). If the camera and your phone are both connected to your home wifi, you will get real-time streaming within your home, and you can turn on privacy mode to keep the signal from traveling to the cloud for processing (i.e., it will stay in your local area network, the signal never leaves your home). This makes the stream much faster, but also makes sure that it will still work during an internet outage. When you leave your house and connect to your cellular carrier or to a different wifi, the camera's signal will travel through Amazon's cloud computing service then get bounced down to your phone's app. The cloud computing does two things. One is that it makes it possible for you to remotely connect to see your live camera wherever you are, as long as you have your phone. Second, it will analyze the sound to check for crying and send you an alert when any fussing is detected. And it seems pretty specific to crying, rather than sending alerts whenever there is a little other noise (like a door closing). It also saves little 30-second video clips from when the crying was detected, so you can go back (like with a DV-R) and see what was going on. Nice touch! And that cloud service is completely free to you, paid for by Lollipop. The digital video is streamed in high definition (720p), and we found that it has generally good video and digital audio sound quality. Even the night vision is really pretty great. One of the features we really liked, and we didn't find on any other wifi baby monitor, was the ability to stream just the audio overnight (audio mode for night nursery). So your smart phone screen can be off, and you can just use it as a basic audio-only monitor; that's a nice feature to save your phone's battery life and keep the bright screen from turning on in the middle of the night. In our testing, this worked really nicely, but it's worth noting that it only works in this mode when you are on the same wifi connection as the baby camera (i.e., you're at home). We found the video quality to be very high, though the "real-time streaming" did sometimes get a little delayed by a few seconds, especially when streaming through the cloud to our iPhone on a 4G connection. A few cool things worth mentioning. Mounting was easy, no more drilling into the crib or using adhesives. You can buy a separate sensor for about $55 that will tell you some additional information about your baby's room, like room temperature sensors, and air quality and humidity sensors; it connects to the camera via Bluetooth. You can also play sounds for your baby through the app, like white noise, trickling water, or even the sound of the vacuum. You can also setup multiple cameras to view on the same app (not at the same time though). So there are tons of great features here, and overall we thought it worked really well in our testing. Drawbacks? Well, it is a little pricey coming in around $150, just like the Cocoon Cam. It also can get pretty laggy when streaming through cellular networks, but that's not really Lollipop's fault. Note that the one currently available on Amazon as of July appears to be a knock-off Lollipop camera, in the meantime, you might need to purchase one directly through the Lollipop website. This camera deserves a much higher spot on our list, but we're worried about where you can actually get a genuine version of the monitor - we're in touch with the company and will update when we hear some news. So overall, this is a great new baby monitor with wifi that you will very likely be pleased with. We'll update this article in 6-months to talk about long-term reliability. Interested? You can check out the Lollipop Baby Monitor here.
This is a nice new addition to our best baby monitor list, with some nice advanced features that make it quite a bit more than just a baby video monitor. Unlike the Infant Optics, this wifi baby monitor uses your own smart phone rather than an external screen. This is just like the popular wireless security cameras you can setup around the house and watch on your smartphone. So instead of walking around the house with a baby monitor screen, like from your bedroom to living room and kitchen, you can simply fire up the app and see what's going on instantly, no matter where you are. In the bathroom? No problem. Out on a date night and want to check in on what the baby sitter's up to? No problem. Just open the app on your phone (Apple or Android) and it will connect to the camera in just a couple seconds and show you a live streaming video feed (with audio) of your sleeping baby. In our testing, we thought the video quality was very good in both daylight and night vision conditions. It was the 720p high definition that helped with clarity, though the wifi video feed did become a bit choppy at points when testing on a network other than our home wifi. That's not surprising, and is just like any other live streaming video. One cool thing about the app is that we could minimize it and still have the audio playing, so you can hear everything from your baby's room while doing something completely different; in that regard, it operates a bit like a music player (iTunes, Spotify, etc). Installation of the system was pretty easy, though a bit more involved than others because of its unique features. First, you install the app on your phone and register with Cocoon Cam. Plug in your camera and use the app to scan the QR code on the back of the camera. That will get the camera and your app working together. Then, you need to mount the camera on the wall of the nursery, about 5 feet above the baby. Don't try to put it on a dresser or edge of the crib. Mount it on the wall so that it's pointing down at your sleeping baby and can see all 4 corners of the crib; we found that installing it correctly was the most important aspect for getting it to work reliably. If you don't have wifi, the camera can also be plugged into your router with an ethernet cable (they provide a short one). OK, so now that it's up and running, and assuming you've installed it per instructions, you'll be able to take advantage of its awesome features. First, the system has an awesome breathing/activity monitor that will let you watch your baby's breathing patterns. It uses infrared light to track the rise and fall of your baby's chest to monitor breathing and activity. Second, for peace of mind, it can send you little alerts when things change, like breathing has slowed or sped up. Correct baby camera placement is critical for these features, so make sure to follow instructions. The way it works is that your video feed is streamed live to the Cocoon Cam cloud where machine learning algorithms securely process the video and assess breathing, and then that information is streamed continuously to the app on your phone. It worked surprisingly well given the complexity of the data streaming and analytics. We did get some anomalous readings in our testing, but mostly when the baby camera wasn't correctly installed above the crib, so it wasn't in clear view of the baby. It also didn't work well when our baby was sleeping on her side, or when her lovies were strewn across her back in random ways. It did work impressively well as a breathing monitor, even with a swaddled baby. Third, the system allows you to download and review videos and activity data, which is a nice touch. Finally, the newest version of this baby monitor includes cry detection, which works reasonably, but we had some false alarms with other noises. So this video baby monitor provides some advanced functionality for parents interested in monitoring their baby's breathing activity and having the flexibility of using their phone as a screen. If you're just looking for a video monitor that uses a phone app, but without the breathing monitor capability, check out some of the other wireless wifi options such as the Nest Cam or Lollipop. We're not completely certain it has the accuracy of a mat-based breathing monitor, and the reliability of the breathing status indicators wasn't perfect, especially if the camera isn't perfectly installed. And no remotely controlling the camera angle (pan, tilt). So overall, this is a great baby monitor, and we're really impressed with how Cocoon Cam's newest model performs, and the feature list is really extensive. Interested? You can check out the Cocoon Cam here.