© 2018 VTech Communications, Inc. All Rights Reserved. VTech® is a registered trademark of VTech Holdings Ltd. Careline®, Safe&Sound®, Audio Assist®, ErisStation®and ErisBusinessSystem® are registered trademarks of VTech Communications, Inc. Connect to Cell™, Orbitlink Wireless Technology™, Myla the Monkey™ and Tommy the Turtle™ are trademarks of VTech Communications, Inc.
They sent me a replacement unit quickly (I have the 2.8, it sounds like sometimes there is stock status issues with the 3.5?), and sent the replacement unit prior to me sending back the defective unit. However, they said the warranty on the replacement unit is only 90 days, vs 1 year for the original purchase. BEFORE there were power issues, I would rate this monitor 5 stars. So I'm just praying that the new units they ship out, knowing there is such an issue with the power port, has fixed the issue vs just sending out more of the same units with an obvious defect. Time will tell... I will update accordingly...
The time you use your device depends on your needs and what type of device you choose. Movement products have the shortest lifespan and only work up to about 6-9 months old or when your little one starts rolling and moving. Sound and video options can be used for years depending on your needs. Video products can arguably be used for the longest period because it can help you keep tabs on older children as they nap and play. Wi-Fi options have the most extended use as they can also keep an eye on a nanny or work for security purposes. The Nest Cam is designed for security use and can be used for years to come in lots of applications. If the duration is a top concern for you, then the Wi-Fi video products, like the Nest cam or LeFun, should be your go-to choice.
This video baby monitor streams real-time footage to a 3.5" color display without connecting to the internet. The product’s battery will last around six hours if the display is always on but can last up to 10 on standby, and it’s range is up to 700 feet, though parents note it doesn’t reliably transmit a signal through numerous walls. In addition to providing high-quality video, the camera has an alarm function, two-way talk, a temperature monitor, and night vision. You can remotely adjust the camera’s angle or zoom with the controller, and if you want to use it as a regular baby monitor, you can turn off the video function.
We tested each product we purchased in key metrics that allow them to function as expected, or provides an additional feature or benefit. Monitors act as something of a lifeline for parents, so it is important that they work well, have adequate range, provide useful images, and are easy to use. If a product doesn't work well enough to instill confidence, then it will fail to offer parents the one thing they really want, more sleep.

But not all of the tech has been figured out just yet. Namely, the spectrum of video quality between makes and models is massive. Overall video quality ranged from murky postage stamp, to crisp, HD signals—even on models that cost more than $200 and were filming in daylight! At night, almost every camera we tested used infrared bulbs (light that’s bright to cameras, but invisible to the naked eye). Paradoxically, because of those powerful LEDs, you often get a better picture quality by setting a camera to night mode during the day—especially in a shadowy room kept dark for a napping baby.
At over $200, are advanced audio/video monitoring systems with multiple cameras and receivers with large screens, as well as the ability to connect to several mobile devices. While they are loaded with features, it’s important to look closely at the audio and video quality. Expensive monitors are just as susceptible to interference as inexpensive ones.

The LeFun C2 720P Wi-Fi earned a 3rd place rank thanks to high scores for range and battery life, and impressive results for video quality and features. This monitor earned a Best Value for Wi-Fi monitors for its budget-friendly list price that is the least expensive in the group and its higher rank. This means you can get a great, top performing monitor, at a reasonable price. The LeFun has motion detection, sound activation, 2-way talk to baby, zoom, and a remote-controlled camera with real pan and tilt capabilities. The downside to this camera is a lag time when using the pan and tilt feature, and it is a little harder to use than the other Wi-Fi options we tested, but given the low price, we suspect most parents will forgive these flaws.
Traditional video baby monitors don't offer the same high-resolution picture quality we're used to seeing on our smartphones and tablets. If you want high-resolution video of your baby, you'll have to go with a Wi-Fi monitor like the NestCam that streams video to your phone or tablet. The Phillips AVENT SCD630 video monitor may not be high-res, but it's the best of the bunch.

The Motorola MBP36S is a wireless video baby monitor that enables you to always keep an eye on things. The crystal clear two-way audio feature allows you to very clearly communicate as if you are in the same room with your little one. Rest assured that they are always safe and sound with the large 3.5 inch diagonal color screen, remote pan, tilt, and zoom, and infrared night vision for keeping an eye on things in very low light levels. The multiple camera viewing with picture-in-picture and auto-switch screen options allow you to add additional cameras to enable you to keep an eye on the entire family in up to 4 rooms of your home. With Motorola’s MBP36S you’re free to watch them dream.
Baby's exposure could potentially be even lower if parents place the camera on a wall at least 15 feet from baby (a distance still good for night vision to work properly with most monitors). Given the sensitivity of baby's developing systems we recommend placing the monitor as far away from the baby as possible while still being able to utilize the night vision as intended and see baby's face to determine if they are awake or sleeping at a glance. For most of the products, this distance is between 10-15 feet from the baby.
Parents love the ability to swap out the three available lenses. If you’re trying to keep track of an active toddler, use the wide-angle lenses to view the whole room. Try the normal or zoom lens when the camera is pointed at the crib to keep an eye on your sleeping baby. You can also change the camera’s viewing angle remotely from the parent unit.
The DXR-8 uses a secure 2.4 GHz FHSS wireless transmission to ensure privacy, gets up to 10 hours of battery life on a single charge, and can switch to audio-only mode with the camera off to save juice. That said, it has gotten panned for a quickly declining battery life (as well as poor range). Still, that hasn’t stopped 24,000 reviewers from giving it an overall 5-star rating on Amazon. In terms of bells and whistles, it features everything parents have come to expect in a monitor: invisible infrared night vision, (no annoying blue light to wake the baby) two-way intercom, room-temperature sensor, and the ability to work with up to four other cameras.
The iBaby’s video and audio quality were among the best in the WiFi group, but like all WiFi monitors, quality and how well it displays real-time action depends largely on your internet quality and speed. Our testers only experienced a delay of less than a second, more noticeable than HelloBaby’s, but nowhere close to Motorola’s three-second delay.
Dropped connections are another problem. "We tested our Wi-Fi monitors on two separate routers and consistently had problems -- we'd often lose the connection some time in the night and not even realize that the monitor had disconnected until morning," Wirecutter says. "This happened with all three Wi-Fi models we tested. We never really felt confident relying on any of the connected monitors overnight, despite the fact that the modem and router were literally on the other side of a wall from the monitor."

The camera angle is 135-degrees (5 nominal degrees wider than the competition), which makes it wide enough to view the length of a play yard from just 2 feet away and see your whole child. (From the same vantage point, other cameras would crop our crib.) And as they grow, you can reposition the camera to easily film a whole room, so you can watch them, not just toss and turn, but run around and cause havoc.


This is a nice new addition to our best baby monitor list, with some nice advanced features that make it quite a bit more than just a baby video monitor. Unlike the Infant Optics, this wifi baby monitor uses your own smart phone rather than an external screen. This is just like the popular wireless security cameras you can setup around the house and watch on your smartphone. So instead of walking around the house with a baby monitor screen, like from your bedroom to living room and kitchen, you can simply fire up the app and see what's going on instantly, no matter where you are. In the bathroom? No problem. Out on a date night and want to check in on what the baby sitter's up to? No problem. Just open the app on your phone (Apple or Android) and it will connect to the camera in just a couple seconds and show you a live streaming video feed (with audio) of your sleeping baby. In our testing, we thought the video quality was very good in both daylight and night vision conditions. It was the 720p high definition that helped with clarity, though the wifi video feed did become a bit choppy at points when testing on a network other than our home wifi. That's not surprising, and is just like any other live streaming video. One cool thing about the app is that we could minimize it and still have the audio playing, so you can hear everything from your baby's room while doing something completely different; in that regard, it operates a bit like a music player (iTunes, Spotify, etc). Installation of the system was pretty easy, though a bit more involved than others because of its unique features. First, you install the app on your phone and register with Cocoon Cam. Plug in your camera and use the app to scan the QR code on the back of the camera. That will get the camera and your app working together. Then, you need to mount the camera on the wall of the nursery, about 5 feet above the baby. Don't try to put it on a dresser or edge of the crib. Mount it on the wall so that it's pointing down at your sleeping baby and can see all 4 corners of the crib; we found that installing it correctly was the most important aspect for getting it to work reliably. If you don't have wifi, the camera can also be plugged into your router with an ethernet cable (they provide a short one). OK, so now that it's up and running, and assuming you've installed it per instructions, you'll be able to take advantage of its awesome features. First, the system has an awesome breathing/activity monitor that will let you watch your baby's breathing patterns. It uses infrared light to track the rise and fall of your baby's chest to monitor breathing and activity. Second, for peace of mind, it can send you little alerts when things change, like breathing has slowed or sped up. Correct baby camera placement is critical for these features, so make sure to follow instructions. The way it works is that your video feed is streamed live to the Cocoon Cam cloud where machine learning algorithms securely process the video and assess breathing, and then that information is streamed continuously to the app on your phone. It worked surprisingly well given the complexity of the data streaming and analytics. We did get some anomalous readings in our testing, but mostly when the baby camera wasn't correctly installed above the crib, so it wasn't in clear view of the baby. It also didn't work well when our baby was sleeping on her side, or when her lovies were strewn across her back in random ways. It did work impressively well as a breathing monitor, even with a swaddled baby. Third, the system allows you to download and review videos and activity data, which is a nice touch. Finally, the newest version of this baby monitor includes cry detection, which works reasonably, but we had some false alarms with other noises. So this video baby monitor provides some advanced functionality for parents interested in monitoring their baby's breathing activity and having the flexibility of using their phone as a screen. If you're just looking for a video monitor that uses a phone app, but without the breathing monitor capability, check out some of the other wireless wifi options such as the Nest Cam or Lollipop. We're not completely certain it has the accuracy of a mat-based breathing monitor, and the reliability of the breathing status indicators wasn't perfect, especially if the camera isn't perfectly installed. And no remotely controlling the camera angle (pan, tilt). So overall, this is a great baby monitor, and we're really impressed with how Cocoon Cam's newest model performs, and the feature list is really extensive. Interested? You can check out the Cocoon Cam here. 
×