While we chose the Withings Home as our top pick, we know that not everyone wants a camera that connects to their phone. One expensive alternative that we grew to love was the Motorola MBP36 ($230). Its video sharpness doesn’t compete with the Withings Home, nor can it see nearly as wide, but the 3.5-inch screen still captured subtle movements, and you can change the camera angle remotely. Oddly enough, though, our absolute favorite feature was the design of its LED audio monitor. Both clear and soothing (the LEDs aren’t blinding, they’re just gentle, subtle lights), we kept it running long after formal testing was complete. We also found its range to be above average, as we were able to sneak down two flights of stairs in an old brick building and maintain signal. Three flights down, outside our building, we found the connection to mostly freeze, but the monitor never gives up—it keeps scanning for hints of frequency to give you audio and video updates. As a company, Motorola is a long-time pro at juggling radio frequencies across their products. Here, it shows.
We don’t think most people would be happiest with a Wi-Fi–enabled baby monitor. The benefits—primarily, being able to view the camera footage remotely, on multiple phones, without keeping track of a separate monitor—do not make up for the disadvantages Wi-Fi monitors have as a category. Security is probably the first thing on most people’s minds. The likelihood of someone hacking into your baby monitor is remote, but it’s possible, said Mark Stanislav, director of application security at Duo Security, in an interview with The Wirecutter. You’re relying on the security of your own home network and also the ability of the manufacturer to secure all its devices. “Once you get into an Internet-connected device, and it really depends on what kind of device it is, but these devices very often bypass your home’s router and firewall. Basically, once you’re connected to this device, you are inside the home’s network. So, it’s possible to use these devices to access other devices in a home,” Stanislav said. (Stanislav was also involved in Rapid7’s research into the vulnerabilities of Wi-Fi–enabled monitors.)
The Motorola MBP36XL wasn’t the fastest-charging battery we tested, but it was reasonable. Most of our hands-on parent testers were happy with the battery life on the parent unit, and they were able to fully recharge it in under five hours. We really like that this monitor also has a rechargeable battery on the camera, which can be used for up to three hours—the more flexibility you have at nap time, the better. One feature this monitor doesn’t have that a few of our parent testers would have appreciated is a sleep or power-save mode.
Like most other product review sites, ConsumerSearch is supported by a combination of commissions on the sale of the products we recommend and ads that are placed on our site by Google. If you find something you like, you can help support us by clicking through and buying the products we pick. Our editorial process is independent and unbiased; we don’t accept product samples, requests for reviews or product mentions, or direct advertising.
Don't make the same mistake I did! We have the MBP36S baby monitor that we purchased in 2016. I dropped the parent piece into the bath tub and needed to replace it. So I came here and bought the same monitor, same model number, to replace my water logged version. After trying to pair the device with our existing cameras, I had no luck. Called Motorola and they tell me that the new version of this monitor (same exact model number) isn't compatible with the previous models. They're only compatible with the new version. It got even more confusing from there...He said there's still older versions for sale and you can tell the version by the model number on the inside of the device under the battery. SO moral of the story is, there's no way when buying this monitor to know which version of the MBP36S you're getting. So if you're buying this to work with additional cameras, proceed with caution. Motorola - you really should have just changed the model number. Problem solved.
This camera is awesome! This is the third camera I purchased, I returned the other two because I was unable to set them up. The only difference with this one is that the instructions actually walked me through the issue that I was having getting it to work with my router. Once I was able to get it set up, it has worked with no issues. I use it daily to check on my pups while I am away. I highly recommend this!
The DXR-8 uses a secure 2.4 GHz FHSS wireless transmission to ensure privacy, gets up to 10 hours of battery life on a single charge, and can switch to audio-only mode with the camera off to save juice. That said, it has gotten panned for a quickly declining battery life (as well as poor range). Still, that hasn’t stopped 24,000 reviewers from giving it an overall 5-star rating on Amazon. In terms of bells and whistles, it features everything parents have come to expect in a monitor: invisible infrared night vision, (no annoying blue light to wake the baby) two-way intercom, room-temperature sensor, and the ability to work with up to four other cameras.
Its parent display unit is the smallest we tested, with a screen only 2.4 inches wide, but the video quality was among the best. By comparison, Infant Optics’ bigger screen didn’t offer a better picture, and our Motorola model had an obvious two-second delay — even when we took it off WiFi and used its direct signal mode to rule out connectivity issues. The differences are slight, but we were impressed that the HelloBaby could keep up with monitors twice its price.
For standalone monitors, we found that two features were nice to have: The first is VOX, which mutes the ambient sounds in a room entirely, activating the speaker (and often the video) only when significant sound is recognized. The second feature we appreciated was LED sound meters. These are an excellent, rare feature to keep constant tabs on a baby while muting a monitor and turning the video off (Consumer Reports appreciates these LEDs, too.)
This is a nice new addition to our best baby monitor list, with some nice advanced features that make it quite a bit more than just a baby video monitor. Unlike the Infant Optics, this wifi baby monitor uses your own smart phone rather than an external screen. This is just like the popular wireless security cameras you can setup around the house and watch on your smartphone. So instead of walking around the house with a baby monitor screen, like from your bedroom to living room and kitchen, you can simply fire up the app and see what's going on instantly, no matter where you are. In the bathroom? No problem. Out on a date night and want to check in on what the baby sitter's up to? No problem. Just open the app on your phone (Apple or Android) and it will connect to the camera in just a couple seconds and show you a live streaming video feed (with audio) of your sleeping baby. In our testing, we thought the video quality was very good in both daylight and night vision conditions. It was the 720p high definition that helped with clarity, though the wifi video feed did become a bit choppy at points when testing on a network other than our home wifi. That's not surprising, and is just like any other live streaming video. One cool thing about the app is that we could minimize it and still have the audio playing, so you can hear everything from your baby's room while doing something completely different; in that regard, it operates a bit like a music player (iTunes, Spotify, etc). Installation of the system was pretty easy, though a bit more involved than others because of its unique features. First, you install the app on your phone and register with Cocoon Cam. Plug in your camera and use the app to scan the QR code on the back of the camera. That will get the camera and your app working together. Then, you need to mount the camera on the wall of the nursery, about 5 feet above the baby. Don't try to put it on a dresser or edge of the crib. Mount it on the wall so that it's pointing down at your sleeping baby and can see all 4 corners of the crib; we found that installing it correctly was the most important aspect for getting it to work reliably. If you don't have wifi, the camera can also be plugged into your router with an ethernet cable (they provide a short one). OK, so now that it's up and running, and assuming you've installed it per instructions, you'll be able to take advantage of its awesome features. First, the system has an awesome breathing/activity monitor that will let you watch your baby's breathing patterns. It uses infrared light to track the rise and fall of your baby's chest to monitor breathing and activity. Second, for peace of mind, it can send you little alerts when things change, like breathing has slowed or sped up. Correct baby camera placement is critical for these features, so make sure to follow instructions. The way it works is that your video feed is streamed live to the Cocoon Cam cloud where machine learning algorithms securely process the video and assess breathing, and then that information is streamed continuously to the app on your phone. It worked surprisingly well given the complexity of the data streaming and analytics. We did get some anomalous readings in our testing, but mostly when the baby camera wasn't correctly installed above the crib, so it wasn't in clear view of the baby. It also didn't work well when our baby was sleeping on her side, or when her lovies were strewn across her back in random ways. It did work impressively well as a breathing monitor, even with a swaddled baby. Third, the system allows you to download and review videos and activity data, which is a nice touch. Finally, the newest version of this baby monitor includes cry detection, which works reasonably, but we had some false alarms with other noises. So this video baby monitor provides some advanced functionality for parents interested in monitoring their baby's breathing activity and having the flexibility of using their phone as a screen. If you're just looking for a video monitor that uses a phone app, but without the breathing monitor capability, check out some of the other wireless wifi options such as the Nest Cam or Lollipop. We're not completely certain it has the accuracy of a mat-based breathing monitor, and the reliability of the breathing status indicators wasn't perfect, especially if the camera isn't perfectly installed. And no remotely controlling the camera angle (pan, tilt). So overall, this is a great baby monitor, and we're really impressed with how Cocoon Cam's newest model performs, and the feature list is really extensive. Interested? You can check out the Cocoon Cam here.