Was very hard to get connected to WiFi to work. I ended up returning it as it was only connecting to its own WiFi vs mine. I couldn’t find any youtube videos or anything online to help me hook it up. I returned the camera and got a way better one which took me maybe 10 mins or less to hook up the first one, and less than 5 mins to hook up my second one I bought.
Movement products are designed to sense the movement associated with a baby breathing. These products attempt to discern when your little one has not moved within a prescribed period that could indicate that they have potentially stopped breathing. While this may seem like a no-brainer option for parents worried about Sudden Infant Death Syndrome (SIDS), they are not foolproof, have not been approved by the FDA as a medical device, and are known to have false alarms where the baby is fine but then suddenly awakened by a loud alarm. While it is an interesting kind of product, we caution parents that this type of device is not a substitute for safe sleeping practices and doesn't prevent SIDS. However, if you are willing to accept false alarms, it can provide another layer of monitoring to help some parents sleep better at night. Movement sensing products are only useful until babies start to roll over, at which point they become unreliable.
Your phone might not have great battery life. Many parents who use a wifi baby monitor come to the realization that their smart phone battery life isn't so great when they are streaming a live video and audio feed from their baby monitor. If you have a newer iPhone or Android device, it will probably do pretty well, but if you have an older phone the batter is probably a bit weaker already and you will notice your battery life dropping pretty quickly during use. So definitely consider battery life and charging options for your smart phone when you are choosing between a self-contained versus wifi baby monitor.
The push notifications were a great way to keep tabs on the little one but not perfect. False alerts happened (e.g., shifting sunlight through the blinds dinged be a motion alert), but that was consistent with all of the smartphone-based monitors. Push notifications can sometimes make a parent feel blasé, but in practice, they make you no less attentive.
This year alone we have seen over 30 new baby monitors enter the market, most of which are low-quality products being mass produced in China. They are cheap and might even work well for a few weeks or months, but give them a little more time and they will start to have all sorts of issues. We've seen way too many melting chargers, malfunctioning screens, and units that are completely dead after a few months. Don't waste your money! Here's some of the factors we consider in our testing:
* Guest Accounts: need to allow guest accounts for grandparents, but absolutely need the ability to turn OFF the microphone for those accounts. The camera is only in the baby's room, but the microphone extends as far as sound travels, and you probably don't want your mother-in-law listening to every discussion in your home. This is a HUGE security feature that is a requirement for anything with guest accounts
It may surprise you to hear that simply being able to last through the night, unplugged, with the display off, qualifies as exceptional battery life for a baby monitor. The Infant Optics was one of the only monitors in our testing that could easily do that, and then last a while longer the next day before needing a charge. (The manufacturer claims it lasts 10 hours with the display off—we got that amount of time off a full charge, even when checking the display intermittently.) This model also charges via a USB connection, which actually sets it apart from a variety of competitors, some of which use ineffective and inconvenient proprietary DC chargers or even disposable batteries.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
Encrypted Wireless Communications: Here's something creepy and strange - there are reports of people tapping into even the best baby monitors and getting some bizarre pleasure from watching your baby sleep or watching you feed the baby in the middle of the night. A few of the manufacturers have included wireless encryption on their systems to make this much less likely.
Unlike the previous monitors that work with complementary mobile apps, Dropcam is Internet-based, making its stream accessible to anyone via computer, tablet, or smartphone. Dropcam is an HD video camera that offers a quick set-up process and provides extra features like two-way audio, and movement and sound detection alerts. Because it's Internet-based, you can give access to grandparents, friends, and family through a secure encrypted site. Another neat feature is the ability to record video to Dropcam's online DVR, letting you save and watch (and rewatch) those adorable movements from baby's nap or right after she gets up.
Rechargeable batteries: Since the camera will most likely stay trained on your bundle of joy, it can remain plugged into AC power. But parent unit displays are designed to be always on and carried with you as you move from room to room. That can drain batteries quickly. Look for a parent unit that runs on rechargeable batteries, so you’re not constantly swapping them out.
The baby monitor market is really exploding with new high-quality options that use a wifi camera connected to an app on your smart phone. The Nanit smart baby monitor is a new addition to this market, and we're really excited about it! We got our hands on this baby monitor for testing in mid-2018. Out of the box, the system is really well designed and made with high-quality components. The camera itself looks sleek and modern, similar to the Lollipop baby monitor. Like the other wifi baby monitors on this list, the Nanit streams high definition (HD) digital video and digital audio right to an app on your phone, and the app is available for Android and Apple devices, including phones and tablets. It does this by connecting to your home's wifi and streaming video right through your existing router. In our testing, we found that if you're at home the video streaming is very fast (low latency) and high clarity. And if your internet goes down, it will still work as long as you're still connected to your home wifi. On a 4G LTE connection, the video is a bit choppy from time to time but we found that a common theme with any wifi-based camera system. Let's first talk about some of the features. First, there is an awesome digital zoom feature right from your app - you pinch the screen just like with anything else and get a clearer view of your baby. Second, it has temperature and humidity sensors so you can keep track of nursery conditions. We compared the temperature and humidity readings to our hygrometer and it was very accurate. Third, we loved the wall-mount because it gives you a really nice overhead vantage point on your baby, unlike some of the standing cameras that sit on a nearby surface - this has a much better view. Note that if you want to mount it on a nearby surface like a dresser or changing table, you can buy a separate Nanit table mount. Fourth, it includes the wall mounting hardware and the cord hiding strips to keep the wires out of baby's view and reach. Fifth, the camera quality was excellent in both day and night vision conditions. Finally, there are some other nifty features, like the ability to receive alerts for sound or motion, to have audio running in the background of your phone (which is great for nighttime), a nightlight that you can control right from the app, and encrypted communication. So that's all excellent, and when you combine it with the monthly subscription ($10/month) for Nanit Insights, it's a great package that not only monitors but also can track your baby's sleep habits (including videos). A 1-month trial is included for this service so you can check it out and see if you want to consider - we suspect that most parents will be content with just the real-time monitoring without any habit tracking. In our testing, everything worked really well, and we were consistently impressed by the streaming video and sensors. The biggest drawback for this monitor is the price - it's about $250, which is up at the top of the price range for this entire list. We'll let you figure out whether it's worth the cost for your specific needs. Update: we have now been using this Nanit baby monitor for just over 3 months, and we continue to be very happy with it, it seems to be not only high quality but also reliable (so far!). Interested? you can check out the Nanit Baby Monitor here!