Our parent testers gave two enthusiastic thumbs up when rating the quality and ease of use of the Motorola MBP36XL. More than half said it was better than monitors they had tried in the past, but they were a bit lukewarm on the value. However, there are several video monitors on the market at considerably higher price points. Overall, we feel that the Motorola MBP36XL is a simple-to-use and reliable video baby monitor you can trust to work when you need it to, and that’s invaluable in our books.
The handheld unit's 5-inch screen is the largest in our review, complementing the camera's wide-angle lens. However, its resolution is the same as smaller units, so the video quality, while acceptable, is poorer. Also, you can't move the camera remotely, a feature you may not use if you only watch your baby as they sleep. The Wide View 2.0 makes up for its video quality with a user-friendly design. It only takes a few minutes to set up and a couple hours to charge the handheld unit. The handheld unit lets you adjust the volume and has an uncomplicated menu. This simplicity comes at the cost of common features – the Wide View 2.0 doesn't track room temperature, and it can't play lullabies through the camera unit. Because this is a simple video monitor, the battery lasted nine hours before it needed to recharge during our tests. The overall best baby monitor, the Infant Optics DXR-8, went 10 hours before shutting off, so this is a very good result. The Summer Infant Wide View 2.0's handheld unit has a limited indoor range compared to most other baby cameras – it’s good enough for most homes but insufficient in particularly large ones. Summer Infant offers a one-year warranty, which is average for video baby monitors.
Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of CNET.com, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro, Tested.com, Geek.com, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert... See Full Bio
This is a powerful solution for the relatively computer savvy parents who want flexibility, accessibility, and convenience. This is not just a great baby monitor, this is a wireless video camera that can be placed anywhere and will communicate with computers and smart phones; many people even use it as a home security camera for its ease of use and placement, high-quality video, and as a monitor with night vision it is pretty unsurpassed. Install the Dropcam App and view your baby through your cell phone no matter where you are, or use it as a powerful security camera for when you're traveling or out of the house. Want to check in on the babysitter while you're out on date night to make sure your baby is napping on time? Want to move the camera to monitor the dog or your home while you're away? Easy, and with the 130-degree wide angle lens, you can place it in even small rooms and maintain a good field of view. If you're away from home, you can also set it up to alert you to any movement: it will send an alert to your phone (or an email) along with a photo of what's going on. Like many baby-oriented video monitors, it also supports two-way communication with a built-in microphone and speaker, has 8x digital zoom, and has great night vision. It also has 1080p quality video, day and night. But it's also a bit expensive for a camera-only system, coming in at about $165. This is a powerful and flexible system that has a very high-quality digital video color and night vision camera, a wide field of view, access to cloud computing, and tons of convenient bells and whistles. This is not your mom's baby monitor. However, there are some requirements here: you need wireless internet in your home, and it needs to be rather high speed to support streaming high-quality video and audio feeds. You also will need to load an app onto your phone (iPhone or Android) or a software package onto your computers (Windows or Macs) in order to access the device. If you ask us, this is one of the best and most flexible solutions for baby monitoring. It's a bit lower on our list because it's not technically a baby monitor so it doesn't include things like sleep mode (turn on only in response to noise), and of course there is no dedicated bed-side monitor for it. It's an all-purpose camera that you can place anywhere and use as a baby monitor when needed. We also don't like that you need to subscribe to the Nest Aware for $10/month if you want to remove annoying banner ads on the app or software package. After paying $165+ for this, you would think the app would be included without annoying ads?
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
Don’t worry if your Wi-Fi tends to be spotty because this monitor operates on a secure radio frequency. Parents applaud its long range — up to 590 feet — and sensitivity to sound no matter where they are in the house. And if you’re in a far-off room, you’ll still know the temperature in the nursery because it’s displayed on the screen at all times.
With a 1,000-foot range and DECT technology, the VTech Safe & Sound Digital Audio relays sound with excellent clarity. Two-way communication offers a way to calm a baby when he or she is waking up or trying to fall asleep. It also includes a night light for late-night feedings. The digital display indicates signal strength and power/battery life. This monitor offers a full range of alarms when your baby wakes — audio, indicator lights, and vibration.
Aimee is a pediatric occupational therapist practicing in the neonatal intensive care unit and pediatric out-patient at Central Pennsylvania Rehab Services at the Heart of Lancaster Hospital. She has been working in pediatrics for 18 years and is also the owner/operator of Aimee’s Babies LLC, a child development company. Aimee has published 3 DVDs and 9 apps which have been featured on the Rachael Ray Show and iPhone Essentials Magazine. Also certified in newborn massage and instructing yoga to children with special needs, Aimee Ketchum lives in Lititz, PA with her husband and two daughters.
This is an awesome and versatile option for anyone looking for a video baby monitor that uses your existing device (Android, iPhone, iPad) as the screen. Simply plug it in, install the app on your phone, and you're off to the races! And it has tons of great features. You can stream high definition (720p) daytime or nighttime (night vision) video and audio, or use audio monitor only. It can send sound and motion alerts right to your device. It has two-way (intercom style) talk, so you can listen to your baby and your baby can listen to you. Unique on this list, it also has time-lapse video so you can review what your little one was up to during the night - watch them roll around and hug their blankies and lovies! When we tested this unit, this time-lapse review was my favorite feature! It also has remote pan and tilt, so if it's not in the perfect position (or your baby isn't!) you can remotely move the camera to get a better view. It also has some unique access features. For example, it uses highly secure encrypted data transmission and allows more than one app user to watch simultaneously (so mom can watch from work while grandma puts baby down for a nap!). That's a lot of awesome features for this compact baby monitoring system that can double as a security camera, and it only runs about $100 online. That's cheaper than most others on this list - but remember, it does not come with a screen, so you need to use your own device. We tested it on a Samsung Galaxy S5, iPhone 5, iPad, and an LG G4 phone. It worked really well on all of them, so we were impressed. So why isn't this higher on our list? Only because it's not an all-in-one package and you need to install the app and use your own device to watch the video. Also, the software is a bit cumbersome to set up. For instance, if your wifi name has any spaces or special characters in it, it won't recognize it at all, you will need to rename your wireless network. Fortunately that's rare but did affect our testing. We saw some good connectivity performance, with it rarely dropping off our wifi. Overall, we like it, and it deserves this (albeit low) position on our best baby monitor list!