The time you use your device depends on your needs and what type of device you choose. Movement products have the shortest lifespan and only work up to about 6-9 months old or when your little one starts rolling and moving. Sound and video options can be used for years depending on your needs. Video products can arguably be used for the longest period because it can help you keep tabs on older children as they nap and play. Wi-Fi options have the most extended use as they can also keep an eye on a nanny or work for security purposes. The Nest Cam is designed for security use and can be used for years to come in lots of applications. If the duration is a top concern for you, then the Wi-Fi video products, like the Nest cam or LeFun, should be your go-to choice.
But not all of the tech has been figured out just yet. Namely, the spectrum of video quality between makes and models is massive. Overall video quality ranged from murky postage stamp, to crisp, HD signals—even on models that cost more than $200 and were filming in daylight! At night, almost every camera we tested used infrared bulbs (light that’s bright to cameras, but invisible to the naked eye). Paradoxically, because of those powerful LEDs, you often get a better picture quality by setting a camera to night mode during the day—especially in a shadowy room kept dark for a napping baby.
Testing battery life for all the monitors was for the parent device only. While some of the dedicated options have a battery in the camera in the event of a power outage, most do not, and they are not intended for use as an all-night option. So while we would support a cordless camera for monitoring baby, due to safety concerns with babies and strangulation hazards, none of the products in our review offer this.
Why spend money on a baby monitor, which serves a single specific purpose, when you could use an indoor home-security camera that you can repurpose once your kid leaves the nursery? We wondered the same thing, so along with with dedicated video baby monitors, we tested a Nest Indoor Cam, currently among our top-rated wireless home security cameras.
iBaby currently works with iOS devices and provides parents with instant video and audio monitoring of their baby from wherever they are. As long as you're connected to the Internet, either via a Wi-Fi or 3G/4G network, and have the complementary iBaby Monitor app installed, you can pan and tilt the monitor to get a better view, and use the built-in audio feature to speak to your baby and offer gentle shushes if she starts to rouse. There is even a motion and sound detector that will alert you, based on the level of sensitivity you've selected.
Netgear brought the best features of its Arlo line of home security cameras to its first baby monitor. That includes Full HD video, night vision, sound and motion detection, two-way audio, 24/7 recording, and free cloud storage. Netgear also used feedback from Arlo owners to add a nursery-centric spin to the Arlo Baby, with a multicolored LED nightlight, a built-in music player with nine lullabies, environmental sensors, and artificial intelligence that can recognize your child’s cries.
While we chose the Withings Home as our top pick, we know that not everyone wants a camera that connects to their phone. One expensive alternative that we grew to love was the Motorola MBP36 ($230). Its video sharpness doesn’t compete with the Withings Home, nor can it see nearly as wide, but the 3.5-inch screen still captured subtle movements, and you can change the camera angle remotely. Oddly enough, though, our absolute favorite feature was the design of its LED audio monitor. Both clear and soothing (the LEDs aren’t blinding, they’re just gentle, subtle lights), we kept it running long after formal testing was complete. We also found its range to be above average, as we were able to sneak down two flights of stairs in an old brick building and maintain signal. Three flights down, outside our building, we found the connection to mostly freeze, but the monitor never gives up—it keeps scanning for hints of frequency to give you audio and video updates. As a company, Motorola is a long-time pro at juggling radio frequencies across their products. Here, it shows.
Baby monitors, despite the name, are meant more for the caregiver than they are for the baby. We asked parents about which features they felt were helpful, like a long range so they could wander carefree all over the house, and reliability so they weren’t struggling to maintain a signal. Other features like being able to play lullabies, or receive temperature alerts are only as useful as you make them. And a few features, like motion monitors, can be exceptionally comforting for some, and distressing for others.
Aimee is a pediatric occupational therapist practicing in the neonatal intensive care unit and pediatric out-patient at Central Pennsylvania Rehab Services at the Heart of Lancaster Hospital. She has been working in pediatrics for 18 years and is also the owner/operator of Aimee’s Babies LLC, a child development company. Aimee has published 3 DVDs and 9 apps which have been featured on the Rachael Ray Show and iPhone Essentials Magazine. Also certified in newborn massage and instructing yoga to children with special needs, Aimee Ketchum lives in Lititz, PA with her husband and two daughters.
Frequency: Some baby monitors operate on the same 2.4GHz frequency band as household products like microwaves, cordless phones, wireless speakers, and so on. When the monitor is on the same frequency as a number of other products, you can experience interference and static. You may want to get a monitor that uses a different frequency like 1.9GHz, which the Federal Communications Commission sets aside for audio-only applications. It's called DECT, or Digitally Enhanced Cordless Telecommunications.
The Nest Cam isn’t a dedicated baby monitor, but an all-around home protection device. Besides aiming the camera at the crib, you can also use it to keep an eye on the nanny, the dog or your empty home while you’re away. The video camera can be set up anywhere, and you can watch the live streaming from your smartphone. It also has two-way communication so you can soothe your little one to sleep, even if you’re offsite. If the device senses motion or sound, it’ll send a phone alert or an email to you. Missed what happened? From the app, you can view photos of any activity that took place over the last three hours. (There are Nest Aware subscriptions available that provide access to 5, 10 or 30 days of recordings, for $5, $10 or $30 a month, respectively). The picture quality is super sharp, too.
Reviewers note that this camera is easy to set up and has a host of useful features. The picture quality is top-notch, according to parents, but many say there is a few second lag time between the camera and video. Overall, this WiFi video baby monitor is a great investment if you’re looking for an Internet-connected product with ample additional features.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
Battery: We wanted a monitor battery that could last overnight, or at least eight hours, without being plugged in. We thought the ideal product would automatically cut off an idle display screen to conserve battery, work at least a few hours unplugged with the screen on, and recharge fairly efficiently. We made a rechargeable battery a requirement. We preferred units designed to connect to power via a standard USB connector, and looked for reports that the baby monitors could reliably charge, recharge, and hold a charge long-term—a disappointingly rare ability in baby monitors.
Traditional video baby monitors don't offer the same high-resolution picture quality we're used to seeing on our smartphones and tablets. If you want high-resolution video of your baby, you'll have to go with a Wi-Fi monitor like the NestCam that streams video to your phone or tablet. The Phillips AVENT SCD630 video monitor may not be high-res, but it's the best of the bunch.
If your internet goes down, your baby monitor goes down. A wifi baby monitor uses your home's internet connection to communicate to servers, then to your app. So if your internet connection goes down, then you will no longer be able to stream video of your baby. That's a huge consideration to keep in mind because you never know when your internet will slow down or simply stop working for several minutes or hours, and you will be stuck without a working baby monitor. There are a few wifi baby monitors that will still communicate locally (within your home's network) when the internet goes down, such as the Lollipop or Nanit. They do this by switching from internet to local area network when an outage is detected, so you can have confidence that if you're connected to your home wifi you'll still see your baby.
The iBaby doesn't have the best sound which is somewhat disappointing considering the great video quality. It is also going to look out of place should you try to use it for any other purpose outside baby monitoring. This limited use means it doesn't retain value the way the Nest Cam will. However, if you want a baby-centric video option that has lots of fun bells and whistles, then the iBaby is the one for you.
Video products for monitoring baby is a growing industry, and it feels like every company is jumping on the bandwagon and throwing something into the already overflowing market of monitors. This plethora of products can make sorting through products difficult and attempts to narrow the field daunting. Luckily, we have already done the legwork by doing an initial review of the top products and choosing 9 of the most popular and well-rated options to test and compare. After months of hands-on testing, we feel confident that no matter what you might be looking for in a video product for monitoring baby, that you can find it in one of our award winners or the top-ranked products in this review.
If we picked a winner based on features alone, this would be much higher up on the best baby monitor list! The folks at Project Nursery really pulled out all the stops with this feature-packed video monitor. Here are some of the stand-out features: remote camera pan and tilt, two-way audio intercom, infrared night vision, secure (encrypted 2.4GHz) wireless connection, motion alerts, lullaby music, convenient unintrusive sleep modes, low or high temperature warning, pairing for up to 4 cameras, accurate low battery warning system, and great battery life. But even with all of that, there's something really awesome and unique about this baby monitor: in addition to the nice 4.3" screen (there's also a 5" version for a much higher price), it also comes with a 1.5" mini video monitor that you can take with you! Put it on your waist, on the kitchen counter, on your wrist (using the included strap!), or on a table or desk while you do work. We found this mini video monitor aspect super versatile, with high-quality resolution and color video, and probably worth the added cost. Speaking of cost, having all these awesome features and the nifty extra monitor comes at a pretty reasonable cost (about $120) unless you upgrade to the 5" screen. Is it worth it? Well, in our testing the mini monitor had a battery life of about 7 hours when fully charged, which we were really impressed with. The larger "parent" monitor is usually plugged in (like on a bedside table), but on battery mode we got it to run overnight without charging for about 12 hours. That's great battery life for such a large-screen video baby monitor! So some high-quality lithium-ion batteries went into making these monitors, and it shows. The color screen and audio quality were also very high on both units, and it's awesome to have multiple parent units for different situations. Out of the box, setup was pretty simple, and all parts appear to be high-quality and well made. So with all those positives, why isn't this #1 on our list!? First, it has the remote camera pan/tilt, but we found that when the camera is tilted down too much the infrared night vision feature doesn't work so well (there's a glare/reflection). We needed to re-position it in our nursery so that it wasn't pointing down at such an extreme angle; we suspect this won't be an issue in most cases. Second, we tried to get both the large "parent" monitor to work at the same time as the mini monitor, but couldn't get them to both show video simultaneously. We understand that may not be a common use case, but might be nice for parents to be in different locations with both being able to monitor the baby's activity. Again, not a huge issue. Overall, this is an excellent baby monitor system with only some minor drawbacks. Worth the cost? We'll leave that up to you: if you want these awesome features, it's probably worth every penny! Update: So it's been about 6 months now, and we've noticed two things worth pointing out. One is that the cameras disconnect intermittently and have a real hard time reconnecting; this has happened in the middle of the night a few times, which was concerning. Second is that the battery life has declined quite a bit since when it was new, now only lasting a few hours off the charger.