The HelloBaby might be a standard monitor, but it excels at the basics. It scored better than some of the more expensive WiFi monitors in picture clarity, and was hands-down the easiest to use. Just open the box, plug in the two devices, and you’re ready to go. No difficult packaging to tear through, and no account setup or device pairing necessary. Our testers had it up in running in less than 3 minutes each time.
Gone are the days of silently peeking into the nursery to check on your napping baby and then, whoops, accidentally waking them up (“No, no, please no!”). A baby monitor uses a camera to watch over the crib, while you carry a handheld device that lets you know what’s going on with your child at any given moment, no matter where you are in your home. There are also other monitors that track sleep or breathing either with a clip or sock.
Battery: We wanted a monitor battery that could last overnight, or at least eight hours, without being plugged in. We thought the ideal product would automatically cut off an idle display screen to conserve battery, work at least a few hours unplugged with the screen on, and recharge fairly efficiently. We made a rechargeable battery a requirement. We preferred units designed to connect to power via a standard USB connector, and looked for reports that the baby monitors could reliably charge, recharge, and hold a charge long-term—a disappointingly rare ability in baby monitors.
The monitor’s sound is generally very clear. We played a recording of a baby crying through the monitor, and the sound was one of the truest. Our hands-on parent testers all said it was easy to adjust the volume, and they were able to get it to a level they were happy with. And when we measured for white noise with a sound meter, it had one of the quietest readings of all monitors we tested.

Users consistently report being impressed with the crystal-clear quality of the MoonyBaby monitor and the special features this particular model comes equipped with, including a baby room temperature display, zoom capabilities, a talk-back button, long-lasting battery life, and five soothing built-in lullabies. With so many advanced features and the ability to link to up to four cameras at once, it’s no wonder the MoonyBaby is on so many parents’ wish lists.
This monitor may also be one of the simplest to set up. Just plug it in and start using it. That’s it! It’s great if you don’t have the time (or the tech knowledge) to connect your monitor to your wireless network or your phone. It allows you to quickly connect four cameras to check on the nursery, the play room, your toddler’s room and the living room all at once. It’s like your own kid-monitoring surveillance system. You can choose an 8-second rotation that automatically switches between rooms to let you know what’s going on.
We got our hands on this monitor in mid-2018 for testing. It's a wifi baby monitor, just like many other options on this list, meaning that it connects to your wireless router to stream a digital video and audio signal to your smart phone wherever you are in the world. What's unique about this Safety 1st wifi baby monitor is that it also includes a wireless speaker pod that you can place anywhere in your house so you can listen in on your baby when you don't want to turn on your smart phone. This is nice during the night when you don't want to turn on your bright screen, or when your phone battery is low and you need to recharge. And the speaker pod has a batter that lasts for about 10-12 hours, so you can easily bring it into different rooms. So that's a nice added feature. And there are some additional features worth mentioning. First, it streams video in high definition 720p, though we do point out that it's basically impossible to stream 720p in real-time to your phone unless you're on the same local network (i.e. if you're at home). But that limitation isn't unique to the Safety 1st, and any wifi monitor that appears to be streaming in real-time HD is likely buffering the video for several seconds before it gets to you (so what you're seeing is delayed). Second, we were impressed with the nice wide-angle camera (130-degrees horizontal field of view), which means that it's more accommodating if you want to position the camera closer to the crib. Third, you can set up movement and sound alerts and customize the sensitivity of the alerts on your app to make sure you're getting an alert when it's important but also avoiding too many false alarms. We liked that you can change the sensitivity of the alerts, and thought that feature worked pretty well in our testing. The auto-recorded 30-second clips were also a nice touch so you can see what was going on when the alert was triggered. Some other things we liked were that the night vision was pretty good quality, you can zoom in and out (but you can't pan or tilt) using the app, there's a two-way intercom so you can talk to your baby, and you can expand the system to multiple cameras that you can toggle between using the app (you can't view multiple cameras simultaneously, however). So how does this wifi baby monitor compare to the other top rated wifi monitors on this list? Well, there's some good and bad. Setup was pretty easy, so that's definitely good, though the owner's manual was a bit difficult to understand at times. And once we got it running, it seemed to stay up and running pretty reliably, so that's also a plus. Also, there's no necessary subscription to store the 30-second clips you record for 30 days in the cloud. So here are some things that we didn't like about this monitor: first, many times when we open the app on our phone, the live stream doesn't connect immediately - sometimes we would restart the app, and other times we'd just need to wait several seconds. That's frustrating when you just received an alert and go to see what's going on, but can't. Second, if your internet goes down you're basically screwed. Unlike the Nanit and Lollipop, it will not revert to streaming over your local area network in the event of an internet outage - so even if you're at home, you won't be able to use the app or otherwise view the video. Third, the camera has a bright little light on it, which we ended up covering with electrical tape. Finally, we found the speaker pod unusually difficult to use, and were disappointed that a charger wasn't even included with it (or maybe it was just missing from our box?). Anyway, so there are some really nice features and high potential for this to be a great baby monitor, but in the end we found several limitations that made it difficult for us to justify spending upwards of $200 on it (note that it's about $150 without the speaker pod). But we'll let you make that decision. Interested? You can check out the Safety 1st HD wifi Baby Monitor here.
×