iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
"WORRY FREE! as long as my baby has on her sock to sleep, I know what her heart rate and oxygen levels are. If the sock doesn't pick up the reading due to poor fit I'm notified, if we aren't close enough to the base station, I'm notified. Any time her levels drop below or rise above what's normal, I'm alerted. I love being able to check on her stats via the app without having to wonder or reach in and feel just to end up waking her."
Both Baldwin and Kay recommend iBaby’s M6S Wi-Fi video monitor for its design and ease of use. Resembling a little robot, the iBaby offers 360-degree views and 110-degree tilt, 1080p video with night vision, and even comes equipped with lullabies. Other features include temperature, humidity, and air-quality sensors, which Baldwin admits are bells and whistles, but could be useful depending on what kind of parent you are. And, of course, everything comes straight through to your smartphone or tablet, which can also remotely control settings. And while some parents may be concerned about potential hacking of Wi-Fi monitors, Baldwin found that the risk is fairly low and usually occurred in cheap, off-brand models.
This really is the monitor that does it all! What puts this monitor heads and shoulders above the rest is the activity sensor pad that goes under baby’s mattress and monitors for lack of movement—a helpful enhancement for tracking baby’s breathing during those scary SIDS months. Once baby grows past that stage, breathe a sigh of relief, but don’t throw the monitor out with the bathwater, because the Angelcare AC517 also comes with both an audio and a video monitor! What more could you ask for?
If you'd like the flexibility of having a dedicated handheld monitor for use in the home, while still being able to rely on your Internet network on a mobile device, the Peek Plus Internet Monitor System is worth looking at. The Peek Plus connects directly to your home wireless network for instant access. You can begin viewing the stream on the included handheld monitor or via a dedicated Internet browser or complementary smartphone app (for iOS, Android and Blackberry), or both. The secure Internet page of your baby's video stream gives family and friends the ability to look in on your baby as well.
This is the #1 best baby monitor on our list, and on many of the major baby product websites. It's the Cadillac (or Lexus?) of baby monitors and has tons of fantastic features. In our testing, we found the video display to be very high quality during both daytime and nighttime conditions. The audio was very high quality as well, and the two-way intercom lets you talk to your baby or sing them a little goodnight lullaby without getting out of bed. We also thought it had great range and good battery life when it's not plugged in. We took it into the back and front yards, without any issues with reception. Bells and whistles abound: this unit has the remotely adjustable pan/tilt/zoom camera, integrated two-way audio intercom system (just push the talk button), baby room temperature monitor, the ability to do digital audio only (screen off for nighttime), and encrypted wireless communication. That adjustable pan allows you to pivot the camera remotely up to 270-degrees left-right, and the adjustable tilt allows you to pivot the camera up to 120-degrees up and down. Super convenient when the camera is positioned close up and your baby moves to the other side of the crib, or the camera gets accidentally bumped or repositioned during the day. The Infant Optics DXR-8 video baby monitor is also expandable up to 4 cameras to place in various locations in your home, and you just press a button on the receiver to toggle between the various camera locations. You can't see all of them at once on the screen of the handheld monitor, but it was easy enough to toggle through the different camera feeds. We also found that the menu is very user-friendly and it's easy to take advantage of all the advanced functions. But you will pay for all this greatness, coming in around $165-175. There is also a relatively inexpensive add-on wide angle lens (see the wide angle lens here) that gives you a much wider viewing angle (170-degrees, which is nearly the same angle as your eyes) to accommodate up-close scenes (like if you place the camera along the edge of the crib). Overall, this is a truly excellent, highly reliable baby monitor with some great features, a great reputation, and is the perfect trade-off for screen size versus portability and battery life. The parents who tested this baby monitor for us fell in love with it, and all had great things to say in their reviews, including its reliability, quality, ease of use, and the accuracy of the temperature display. We definitely can't say that for all of the baby monitors on this list! There is only one con that we found with this baby monitor: an audible beep when you turn the unit off (only on the base unit, not on the camera), which might wake your partner when you quickly turn the unit on/off just to check on your baby in the middle of the night. But that's pretty minor and only one of our testing parents brought it up in their review. Also, according to our Facebook followers the newest version no longer has that beep (we're getting a new testing unit now). In our opinion, this baby monitor passed our testing with flying colors, and we think it's worth every penny! Interested? You can check out the Infant Optics DXR-8 here. Want something about half the price with fewer features? Check out the earlier version of this baby monitor: the Infant Optics DXR-5, also a great option for a little less cash.