The video on its handheld unit is sharp and consistent, and even with 30 feet between the camera and the handheld unit, there wasn’t lag or interruption in the video. In addition, you can use the handheld unit to remotely point the camera at different parts of the room. Although you can't record video or take pictures with the DXR-8, these aren’t important features for a baby monitor. Setup is incredibly easy. After charging the handheld unit overnight, we plugged in the camera and it instantly connected. There was a slight lag in the video when the camera and handheld unit were 50 feet apart, which is why it only scored 90 percent in our connection test, but that’s still better than other baby monitors we reviewed. In our battery life test, the monitor lasted 10 hours – only one other model has a battery that lasts this long. This video baby monitor doesn't have Wi-Fi, but that's not a problem. Our top Wi-Fi monitor, the Philips Avent, is more expensive and didn't perform as well as the DXR-8 in our tests. This baby camera has swappable lenses for telephoto and wide-angle views. It also has invisible infrared LEDs that let you see your baby in complete darkness without waking them. The DXR-8 doesn't have a nightlight or lullabies to comfort your baby, but those exclusions don't make this baby monitor any less impressive. The warranty on the DXR-8 only lasts a year, compared to the two-year warranty on the Philips Avent.
The Snuza Hero SE is a wearable device that clips to baby's diaper or bottoms. It has a unique vibration alert that attempts to rouse little ones into moving enough to stop the impending alarm that will sound audibly if the baby doesn't move. This vibration feature means that false alarms may be less likely to result in a crying baby, though they could cause lack of deep sleep if they happen continually. The Snuza is a nice wearable choice that is easy to use, portable, and didn't have many false alarms during our testing. While it is not a replacement for safer sleep practices, it could provide some parents with increased peace of mind for a better night's sleep.
Hear more with the one-of-a-kind portable Smart Audio Unit. Together, the Safety 1st HD WiFi Baby Monitor Camera and Smart Audio Unit gives you hands free monitoring, while still allowing you to monitor your baby both audibly and visually.It features noise and motion activated technology, which means it stays in quiet mode, without any constant white noise, until sound or motion is detected. When noise is detected, audio is streamed from the nursery to the Smart Audio Unit.It also features two way talk, a light ring indicating that motion or sound has been detected and a 12+ hour extended battery life for assurance throughout the night.
We pride ourselves in having an ad-free website - that means no annoying pop-ups or banner ads for you. But it also means no advertising revenue for us! Instead, Mommyhood101 participates in the Amazon Services LLC Associates Program, an affiliate advertising program providing a means for sites to earn advertising fees by linking to Amazon.com. Most product links lead directly to Amazon.com. Complete terms and conditions.
UPDATE: Eleni from Motorola Customer Service commented on the below review. I have read reviews where dealing with Customer Service via phone has been a huge pain, but I felt the process via email was pretty standard, and Eleni always responded to me within the day (sometimes within the hour). They asked a number of questions verifying the issue, I had to send the receipt and serial #, etc. I was happy with the Customer Service experience. If you do need to contact CS, I would recommend email over phone from what other reviews have said.
One minor but potentially annoying flaw: The “on” lights on the parent unit are a touch bright, and you may be more sensitive to them since you’re likely to have the unit within view as you sleep. They appear as greenish yellow light from the face of the unit, and a charging light, which is blue when it’s fully charged. Depending on how sensitive you are to light, you may want to lay the display face down on a nightstand or cover the status lights with tape.
Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of CNET.com, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro, Tested.com, Geek.com, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert... See Full Bio
This is a nice new addition to our best baby monitor list, with some nice advanced features that make it quite a bit more than just a baby video monitor. Unlike the Infant Optics, this wifi baby monitor uses your own smart phone rather than an external screen. This is just like the popular wireless security cameras you can setup around the house and watch on your smartphone. So instead of walking around the house with a baby monitor screen, like from your bedroom to living room and kitchen, you can simply fire up the app and see what's going on instantly, no matter where you are. In the bathroom? No problem. Out on a date night and want to check in on what the baby sitter's up to? No problem. Just open the app on your phone (Apple or Android) and it will connect to the camera in just a couple seconds and show you a live streaming video feed (with audio) of your sleeping baby. In our testing, we thought the video quality was very good in both daylight and night vision conditions. It was the 720p high definition that helped with clarity, though the wifi video feed did become a bit choppy at points when testing on a network other than our home wifi. That's not surprising, and is just like any other live streaming video. One cool thing about the app is that we could minimize it and still have the audio playing, so you can hear everything from your baby's room while doing something completely different; in that regard, it operates a bit like a music player (iTunes, Spotify, etc). Installation of the system was pretty easy, though a bit more involved than others because of its unique features. First, you install the app on your phone and register with Cocoon Cam. Plug in your camera and use the app to scan the QR code on the back of the camera. That will get the camera and your app working together. Then, you need to mount the camera on the wall of the nursery, about 5 feet above the baby. Don't try to put it on a dresser or edge of the crib. Mount it on the wall so that it's pointing down at your sleeping baby and can see all 4 corners of the crib; we found that installing it correctly was the most important aspect for getting it to work reliably. If you don't have wifi, the camera can also be plugged into your router with an ethernet cable (they provide a short one). OK, so now that it's up and running, and assuming you've installed it per instructions, you'll be able to take advantage of its awesome features. First, the system has an awesome breathing/activity monitor that will let you watch your baby's breathing patterns. It uses infrared light to track the rise and fall of your baby's chest to monitor breathing and activity. Second, for peace of mind, it can send you little alerts when things change, like breathing has slowed or sped up. Correct baby camera placement is critical for these features, so make sure to follow instructions. The way it works is that your video feed is streamed live to the Cocoon Cam cloud where machine learning algorithms securely process the video and assess breathing, and then that information is streamed continuously to the app on your phone. It worked surprisingly well given the complexity of the data streaming and analytics. We did get some anomalous readings in our testing, but mostly when the baby camera wasn't correctly installed above the crib, so it wasn't in clear view of the baby. It also didn't work well when our baby was sleeping on her side, or when her lovies were strewn across her back in random ways. It did work impressively well as a breathing monitor, even with a swaddled baby. Third, the system allows you to download and review videos and activity data, which is a nice touch. Finally, the newest version of this baby monitor includes cry detection, which works reasonably, but we had some false alarms with other noises. So this video baby monitor provides some advanced functionality for parents interested in monitoring their baby's breathing activity and having the flexibility of using their phone as a screen. If you're just looking for a video monitor that uses a phone app, but without the breathing monitor capability, check out some of the other wireless wifi options such as the Nest Cam or Lollipop. We're not completely certain it has the accuracy of a mat-based breathing monitor, and the reliability of the breathing status indicators wasn't perfect, especially if the camera isn't perfectly installed. And no remotely controlling the camera angle (pan, tilt). So overall, this is a great baby monitor, and we're really impressed with how Cocoon Cam's newest model performs, and the feature list is really extensive. Interested? You can check out the Cocoon Cam here.