Don't make the same mistake I did! We have the MBP36S baby monitor that we purchased in 2016. I dropped the parent piece into the bath tub and needed to replace it. So I came here and bought the same monitor, same model number, to replace my water logged version. After trying to pair the device with our existing cameras, I had no luck. Called Motorola and they tell me that the new version of this monitor (same exact model number) isn't compatible with the previous models. They're only compatible with the new version. It got even more confusing from there...He said there's still older versions for sale and you can tell the version by the model number on the inside of the device under the battery. SO moral of the story is, there's no way when buying this monitor to know which version of the MBP36S you're getting. So if you're buying this to work with additional cameras, proceed with caution. Motorola - you really should have just changed the model number. Problem solved.
The superior wireless range of the MBP36S lets you keep connected to your baby up to 590 feet away. So even if you have a larger home, you don't have to give up safety or the ability to stay connected to your little one. An alarm sounds when you're getting out of range of the transmitting unit, so you'll never have to wonder if you're close enough to hear what's going on. A low battery alert also sounds when it's time to recharge the battery.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
Yes and no, it depends on what you want your device to do and what levels of EMF you are willing to accept. If you are looking for video and sound then you're in luck, all of the video products offer both and products like the iBabyM6S can give you crystal clear visuals with sound and fun baby specific features. If you are interested in sound and movement, only a handful of movement products come with sound, and they are all mattress style devices. If you want movement, sound, /and video, then you are limited and potentially introducing high EMF levels to your baby's nursery. The BabySense 7 is offered as a package with a camera, but the EMF levels were high in our tests making it one we aren't big fans of. To avoid this, and to get the best of the best options, we suggest combining two products (movement and video) and incurring a slightly higher cost to avoid higher EMF. Movement products are only good up to about six months or when your little one begins to roll over by themselves. Because movement can lead to false alarms and can't take the place of safe sleep practices or reduce the occurrence of SIDs, we think parents can get a good night's sleep with a video product with sound and forgo the movement options if budget is a concern.
This is the baby monitor that everybody wants to love, with its unique and cute style, its wifi capability, and its huge list of awesome features. The iBaby M7 is the newest addition to the iBaby Care line of wifi baby monitors, released in 2018 and slowly gaining traction and popularity among discerning parents. It builds upon the popular M6S baby monitor by adding a few features, including support for both 2.4GHz and 5.0GHz wifi signals (dual band), a moonlight soother projection system, air quality sensor, and diaper and feeding time alerts. When we setup the camera and installed the app on our Andoid device (also compatible with Apple iOS), we first had some difficulty getting the camera to connect. It turns out that our camera was too far from our wireless router - the manufacturer recommends that the camera is within about 15-25 feet of the router or it will have a poor connection. As a little hint, there is a black reset button on the back of the camera, and if you hold it down for about 45 seconds you'll hear a little jingle and that will reset it. We needed to use that trick to get it working. Once we got it working, it was easy to add the iBaby camera to the app and we were off to the races. And we were impressed with all the features. You could play lullabies, music, white noise, and even bedtime stories like Mother Goose (though the Jack be Nimble option wasn't so calming for bedtime!); you can even add your own music to the options, which is a really cool capability. Up on top of the camera is a little projector that will beam the "moonlight soother" projection onto the ceiling; it can be still, rotating, or off completely. Another hint is that the "help" button on the camera unit will actually turn the projector on or off when you don't have your mobile device. Additional features include motion alerts, temperature and air quality alerts, and diaper and feeding alerts (which once we set up, were actually pretty useful rather than having them on a different app). Speaking of the app, we actually liked it quite a bit - it was intuitive, reliable, and easy to use. Multiple users can access it simultaneously from different devices (use the "Invite & View Users" option), and the same app can be used to cycle between different iBaby cameras you have set up around the house (even the older M6 model can also be added). We thought the video quality was very good, it uses high definition and its night vision was clearer than many of the other options on this list. You can have your device's screen off and the app will prompt an alert when there is noise or movement, so you don't need to keep your phone's screen on all night. The app also lets you save photos and videos to your device, and you can be confident with its security because it's streaming encrypted to the state-of-the-art Amazon AWS servers. So we said it's the baby monitor everyone wants to love, and it should be clear why - the features are truly remarkable, especially for a wifi baby monitor that is only about $170. The only major downfall of this wifi camera system is the connectivity: you need to have it very close to your home's router for it to get a good connection, and it can be finicky with connectivity at times. Once it's connected, we were really happy with it, but it did intermittently disconnect at times which was definitely frustrating. So overall, this is a feature-rich wifi baby monitor that has some great things going for it, and is worthy of this spot on our list. Once they get the connectivity issues fully resolved, this will definitely creep up higher on our list. Interested? You can check out the iBaby Care M7 Baby Monitor here. 

This is the #1 best baby monitor on our list, and on many of the major baby product websites. It's the Cadillac (or Lexus?) of baby monitors and has tons of fantastic features. In our testing, we found the video display to be very high quality during both daytime and nighttime conditions. The audio was very high quality as well, and the two-way intercom lets you talk to your baby or sing them a little goodnight lullaby without getting out of bed. We also thought it had great range and good battery life when it's not plugged in. We took it into the back and front yards, without any issues with reception. Bells and whistles abound: this unit has the remotely adjustable pan/tilt/zoom camera, integrated two-way audio intercom system (just push the talk button), baby room temperature monitor, the ability to do digital audio only (screen off for nighttime), and encrypted wireless communication. That adjustable pan allows you to pivot the camera remotely up to 270-degrees left-right, and the adjustable tilt allows you to pivot the camera up to 120-degrees up and down. Super convenient when the camera is positioned close up and your baby moves to the other side of the crib, or the camera gets accidentally bumped or repositioned during the day. The Infant Optics DXR-8 video baby monitor is also expandable up to 4 cameras to place in various locations in your home, and you just press a button on the receiver to toggle between the various camera locations. You can't see all of them at once on the screen of the handheld monitor, but it was easy enough to toggle through the different camera feeds. We also found that the menu is very user-friendly and it's easy to take advantage of all the advanced functions. But you will pay for all this greatness, coming in around $165-175. There is also a relatively inexpensive add-on wide angle lens (see the wide angle lens here) that gives you a much wider viewing angle (170-degrees, which is nearly the same angle as your eyes) to accommodate up-close scenes (like if you place the camera along the edge of the crib). Overall, this is a truly excellent, highly reliable baby monitor with some great features, a great reputation, and is the perfect trade-off for screen size versus portability and battery life. The parents who tested this baby monitor for us fell in love with it, and all had great things to say in their reviews, including its reliability, quality, ease of use, and the accuracy of the temperature display. We definitely can't say that for all of the baby monitors on this list! There is only one con that we found with this baby monitor: an audible beep when you turn the unit off (only on the base unit, not on the camera), which might wake your partner when you quickly turn the unit on/off just to check on your baby in the middle of the night. But that's pretty minor and only one of our testing parents brought it up in their review. Also, according to our Facebook followers the newest version no longer has that beep (we're getting a new testing unit now). In our opinion, this baby monitor passed our testing with flying colors, and we think it's worth every penny! Interested? You can check out the Infant Optics DXR-8 here. Want something about half the price with fewer features? Check out the earlier version of this baby monitor: the Infant Optics DXR-5, also a great option for a little less cash.
×