We bought ours two and a half years ago. From the beginning the light went out at 21-22 *C,but worked as expected both warmer and colder than this. It took ages to work out why it sometimes wasn't on. This was a pain when trying to use it as a night light. But the music is good, I like the temperature warning, the range is good, the travel bag is handy. The light began to work intermittently after 2 years and then the digital display went. It's now unusable.
Wi-fi baby monitors are the latest innovation in high-tech baby gear, and they’re super convenient. A baby monitor with wi-fi allows you to connect anywhere that has Internet service or Bluetooth capability, and the monitor can often be controlled remotely using a smartphone or computer. This functionality makes the wi-fi baby monitor great for travelling (unless you’re heading to a remote location). Safety tip: No matter what connection you use, be sure that it’s a secure connection in order to prevent your monitor from being hacked.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
After just a couple days the product is holding up. It feels pretty cheap in build quality so we will see how long it lasts but the picture quality is far above anything in a similar price range. There are pretty much no instructions but it comes ready to go out of the box paired with the camera and includes hardware to mount on the wall. The camera has a pretty wide angle lense so mounting it above a crib on the wall was pretty easy to do, it could also easily sit on a shelf slightly out of the way. The night vision is remarkably clear, it really looks just like daytime on the monitor screen when it is pitch dark in the room. Battery life on the monitor when not plugged in is a little short, about 3 hours with the screen on 100% of the
For these reasons, the Evoz Vision tops our list as best travel baby monitor. The Wi-fi enabled monitor allows more than one person to check in on baby—a nice feature when you're traveling to visit family and friends. Just grant grandparents or sitters access to the app. Another great travel feature: It has an unlimited range. Plus, it uses cry detection algorithms to distinguish baby cries from other noises and will alert you via text or email when baby cries, based on your preference settings. Just make sure you'll have Wi-fi at your destination.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
Keep a watchful eye over your bundle of joy while enjoying a well-earned break with the help of our range of audio and video baby monitors. Here at BT Shop we understand that the health and wellbeing of your little one is of paramount importance, which is why we supply only the very best in baby monitors to let you watch over them while they sleep. Alerting you if they need your assistance, all of our BT baby monitors are available to buy online right now.

BT digital baby monitor 300 Only selling as no longer needed It needs new rechargable batteries if you are wanting to use it as cordless as batteries drain quickly. Works fine when using the mains power cable. Occasional clicking sound through monitor, we never figured out what it was and it didn't interefere with the functions of the units so never bothered us.
This thing has been running like a champ. I don't have other manufacturers units so I can't compare but this one does what is supposed to do. I really like that fact that the baby monitor can be unplugged and moved around the house or carried in a pocket. The entire unit, camera and receiver, is small enough that it can be packed in your suitcase and taken to relatives if needed. Night vision is grainy but hey there is no light so that is fine. Detail is so good at night and we feel very comfortable using this with our newborn and now 6 month old. good customer service. Based on that experience and the performance of the unit I just ordered another one for my niece who is expecting in a month.
All baby monitors should have clear sound quality, minimal (or no) interference and a good range and signal strength (which manufacturers often exaggerate), particularly if you have a larger home and garden. If you want to see your child, as well as hear them, you’ll need a video monitor. Or perhaps you’ll be more reassured by movement sensor pads, which sit underneath the mattress and set off an alarm if there’s no movement for 20 seconds – although for some people, this just causes more anxiety (and there is no evidence it can actually prevent cot death). 

We were also disappointed that the Angelcare’s parent unit lacks an out-of-range warning. If you’re in the backyard or basement and the monitor disconnects, it’s not clear whether you’re looking at a napping baby or a frozen screen. Still, it beat out the Baby Delight for sound and video quality and offers a few customizable features: You can adjust the volume on the baby unit as well as the parent unit, and set up timed alarms and temperature alerts.
The obvious benefit of this baby monitor is being able to leave my baby safely in the cot and monitor him from afar, but there are also other amazing functions. The sound quality on this product is great – loud enough that you can hear as soon as your baby wakes up and react fact. The talkback function was great, as it meant I could speak to my son and soothe him without having to go into his room. These extra touches were surprising and great.
Claiming to be the “first-ever monitor with interchangeable optical lens capability,” allowing customizable viewing angle and zoom, the DXR-8 represents a big leap in features — and price — from the reliable Infant Optics stalwart DXR-5 model. It has a larger (3.5 inch/9 cm) full color LCD display monitor compared to the DXR-5 (at 2.4 inch/6 cm) monitor screen. There is also an optional wide angle lens sold separately. The remote PTZ camera is also a step above the DXR-5 camera. The DXR-8 is commended for its ultra-long battery life — 10 hours on power-saving mode and 6 hours with screen on — which far outlasts most competitors’ products.
When it came time to put LO in his room on the opposite end of the house I was a nervous wreck. I decided on this monitor because of the good reviews and price point. After using it for several months, now I can say I love it. It made the transition so much easier than it would have been with a regular monitor. I love that it can play different melodies and has a 2 way microphone. Also love the room temp display and the clock on the screen. You can adjust the backlight to your liking. This monitor does not have the controls that allow it to be turned by remote. It is stationary so set it up where you can see baby if he or she moves. It also comes in handy if you have a sneaky toddler during nap time. I can set it up and if she tries sneaking around I can tell her to get back into bed ;)
Eufy, a company known for its robot vacuum cleaners, is branching into baby monitors with the new $135 Security SpaceView monitor. The monitor comes with a handheld display featuring a 5-inch LCD screen and enough battery power to let you check in on the nursery throughout the day. We're waiting to get our hands on the Security SpaceView camera, but with 330-degree tilt and 110-degree pan, it sounds like there's little that will escape the 702p camera's view. Other features include night vision, noise alerts and two-way talk. Stand by for a full review.
Don't be fooled by its cute looks and adorable green bunny ears: Netgear's Arlo Baby is a very capable baby monitor that delivers sharp video of your nursery to your smartphone. The Arlo Baby includes features such as night vision, temperature and air quality sensors, a color-changing nightlight and a speaker that can play lullabies. All of this is very easy to manage thanks to a well-designed mobile app.
A big screen, a camera that zooms and a built-in nightlight make the In View monitor a great pick when you’re on a budget. The monitor also offers all the standard features: low-battery and out-of-range indicators, sound-activated lights and rechargeable batteries for the handheld monitor. Use the camera as a tabletop or mounted on the wall. And if you plan on having a big family, the monitor works with up to four cameras.
×