I have had the monitor for a little over a month and have had no issues. My last monitor was a Motorola mbp36 and gave out after 3 years. The Motorola was heavier and felt more durable, however it is also nice to have a lightweight monitor. The features have all worked well on the ANMEATE. I actually prefer the night vision on the ANMEATE as it's much clearer than it was on the Motorola. The two way talk and the zoom/pan feature seems equal on the two. I could move the actual camera angle via remote on the Motorola and I really miss that. Sometimes I put the camera at a bad angle and I get downstairs to the monitor just to realize I can't see the baby. Then I have to run back up and fix it instead of moving it with the remote. So that stinks, but now I try to angle the camera better the first time. My main reason for getting this monitor was the price. I could add more cameras for 40 instead of 100 a piece. Not to mention I got the first camera and parent unit for half the price of the Motorola.
We had the 150 for our daughter and bought the 250 when our son was born. The 250 has superior sound quality but thats all it has going for it. The battery life is very poor, it no longer lasts more than five hours so when we take it up to bed with us it starts beeping at about 4am. There is a number to call for replacement batteries but they never answer the phone.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 

Despite the 4.4 stars out of 5 the DXR-8 receives (based on well over 200 reviews) from Amazon customers, some users report that the monitor conflicts with other devices on the 2 GHz wavelength, viz, the monitor drops the wireless signal from the camera. Others grouse that while up to four cameras can be connected to one monitor, only one camera can be paired to one monitor, viz, only one monitor can be used. This means, similarly to the Foscam FBM 3501 mentioned previously, a parent can only monitor one child in one room with the DXR-8 and not multiple rooms simultaneously. Also, the   DXR-8 does not have internet streaming capability to one’s smartphone or tablet — a glaring omission considering the product’s hefty price tag.
Unlike the DM221, the baby monitor does require two AAA batteries that are not included and it does not include two-way transmission. Despite this, battery life lasts up to 20 hours and the system includes a long range of up to 1,000 feet outdoors with 150 feet indoors. There is a five-level sound indicator graphic bar on the parental unit that will indicate the level of sound in your baby’s room so you can visually monitor the noise level with the unit muted.
In addition to the standard parent and baby unit, these monitors include a device that tracks your baby’s movements, breathing, or heart rate, and offer time-sensitive alarms that alert you if your baby hasn’t moved in the last 20–30 seconds. While they aren’t proven to reduce SIDS, many new parents told us these monitors gave them added peace of mind.
Being a mom is stressful enough without running to check on a sleeping baby every few minutes. This monitor has a lot of useful features, including two-way intercom, room temperature monitoring, "eco" mode that keeps the screen off until it hears your baby make a sound, remote zoom, and a few music (lullaby) options. It is also expandable up to 4 cameras, using the same base unit. From the base unit, you can cycle through which camera you want to view at any given time; you cannot view them all simultaneously on the same base unit (like picture-in-picture). We really liked the eco mode, and also liked that on the top of the unit there is a little flashing light to reassure you that it's on during eco mode, even though the screen is off.
A big screen, a camera that zooms and a built-in nightlight make the In View monitor a great pick when you’re on a budget. The monitor also offers all the standard features: low-battery and out-of-range indicators, sound-activated lights and rechargeable batteries for the handheld monitor. Use the camera as a tabletop or mounted on the wall. And if you plan on having a big family, the monitor works with up to four cameras.
×