If you experience any problems, please call the Helpline on 0808 100 6554* 27/5/08 13:03 Page 30 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Within the 12 month guarantee period If you experience difficulty using the product, prior to returning your product, please read the Help section beginning on page 28, or contact the BT Baby Monitor Helpline for assistance on 0808 100 6554*.
So happy I found this monitor! I previously had a more high tech video monitor from another company that had a ton of features, but malfunctioned on me within a month. I replaced it with the same one thinking it was a one off, but sure enough it started acting funny within a couple weeks. This monitor has been great I'm amazed at the battery life and range it has. My only complaint is that the power adapter cord for the camera needs to be a lot longer to have more options of hanging it on a wall while keeping it a distance from babies reach.
After just a couple days the product is holding up. It feels pretty cheap in build quality so we will see how long it lasts but the picture quality is far above anything in a similar price range. There are pretty much no instructions but it comes ready to go out of the box paired with the camera and includes hardware to mount on the wall. The camera has a pretty wide angle lense so mounting it above a crib on the wall was pretty easy to do, it could also easily sit on a shelf slightly out of the way. The night vision is remarkably clear, it really looks just like daytime on the monitor screen when it is pitch dark in the room. Battery life on the monitor when not plugged in is a little short, about 3 hours with the screen on 100% of the
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
Arlo Baby packs a ton of features every new parent will ever need for a nursery. Inside the camera are air quality, temperature, and humidity sensors that alert you when nursery conditions are out of desired range, multi-colored night light, and a music player that plays bedtime melodies or your own. All features can be remotely managed using the Arlo app.
Range: Range is the main drawback of an RF model, as audio monitors can roam farther out, and a Wi-Fi connection can theoretically be checked anywhere. We wanted an adequate range for a typical home—to be able to maintain a signal up or down a flight of stairs, across the house, and out on a patio or driveway, but we didn’t expect much beyond that. We zeroed in on monitors rated to about 700 feet of range or greater.1
When my baby was starting to stir in the morning, I found that if I put on the lightshow and one of the lullabies, she was content listening and watching these whilst I went downstairs to make her morning bottle. I also used the temperature feature every day to check how hot it was and what to dress my baby in. My daughter loved the lullabies and I found on a few occasions putting a lullaby on in the night allowed her to drift back to sleep without me having to go into the nursery.
I would definitely recommend this product to a friend. It is easy to use, has great features and is very affordable. BT have thought of everything and I especially like the fact that you can turn the beep on or off for the crying alert when the monitor is on mute, which is something that other models are lacking. I love the lightshow and the choice of lullabies and found that the monitor was really clear all around the house and the parent unit was very portable. I also loved how clear and easy the menu was to use and that you could control features such as the lightshow and nightlight from the parent monitor, without having to go into the nursery.
It really depends on what you feel most comfortable with. There are audio monitors that allow you to listen to any noise coming from the nursery, vital monitors that track sleep and breathing and video monitors that add sight to sound. Babylist parents overwhelmingly choose video monitors. The security of seeing what your child is up to—like if they’ve gotten tangled in their swaddle, pulled their diaper off or climbed out of the crib—can be worth the extra cost of a video monitor.