A baby monitor, also known as a baby alarm, is a radio system used to remotely listen to sounds made by an infant. An audio monitor consists of a transmitter unit, equipped with a microphone, placed near to the child. It transmits the sounds by radio waves to a receiver unit with a speaker carried by, or near to, the person caring for the infant. Some baby monitors provide two-way communication which allows the parent to speak back to the baby (parent talk-back). Some allow music to be played to the child. A monitor with a video camera and receiver is often called a baby cam.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 

The Nest Cam isn’t a dedicated baby monitor, but an all-around home protection device. Besides aiming the camera at the crib, you can also use it to keep an eye on the nanny, the dog or your empty home while you’re away. The video camera can be set up anywhere, and you can watch the live streaming from your smartphone. It also has two-way communication so you can soothe your little one to sleep, even if you’re offsite. If the device senses motion or sound, it’ll send a phone alert or an email to you. Missed what happened? From the app, you can view photos of any activity that took place over the last three hours. (There are Nest Aware subscriptions available that provide access to 5, 10 or 30 days of recordings, for $5, $10 or $30 a month, respectively). The picture quality is super sharp, too.


Sound activation is a feature we think parents should consider. This feature creates a quiet monitor unless the baby is actively making noise and translates to parents potentially getting more sleep because they aren't kept awake by ambient noises. Having sound activation means you only hear what you want to. This feature can be found in dedicated and Wi-Fi monitors.
From a pure imaging standpoint, night vision is vital for watching your baby sleep from another room, and is standard for most baby monitors. Motorized pan and tilt (which lets you swivel the camera from afar) isn't quite as common, but is very welcome if you have a toddler and want to scan an entire room. High-definition is a nice plus, but you don't need the highest-resolution sensor to keep tabs on your baby—most of the monitors we test use 720p cameras rather than 1080p.

This monitor is known for its zoom lens, included in the box, that lets you see your baby up close even if you have to position it farther away from the crib. You can use the monitor to remotely adjust the camera, and you don’t have to worry about plugging the monitor in overnight—it can sit on your nightstand for up to 10 hours in the power-saving mode (similar to sleep mode on your computer, but it still provides sound monitoring while the display is off) and up to six hours with the display screen constantly on.
×